Bruce Dubbs <bruce.dubbs@xxxxxxxxx> writes: > I have a problem when trying to document madam-3.4 for the Linux From > Scratch project. The package builds fine: > > tar -xf mdadm-3.4.tar.xz > cd mdadm-3.4 > make > make test > > Then when I run: > > sudo ./test --keep-going --logdir=test-logs --save-logs > > Some tests fail and one hangs forever. I can post logs if needed. > > Please run './test' as root > Testing on linux-4.4.1-lfs-7.9-rc1 kernel > Saving logs to test-logs > tests/00linear... succeeded > tests/00multipath... succeeded > tests/00names... succeeded > tests/00raid0... succeeded > tests/00raid1... FAILED - see test-logs/log-00raid1 for details > cp: cannot stat '/var/tmp/log': No such file or directory Do you have a proper /var/tmp on that system? > tests/00raid10... succeeded > tests/00raid4... succeeded > tests/00raid5... succeeded > tests/00raid6... succeeded > tests/01r1fail... succeeded > tests/01r5fail... succeeded > tests/01r5integ... succeeded > tests/01raid6integ... succeeded > tests/01replace... > > The failure says: > > ++ case $* in > ++ udevadm settle > +++ cat /proc/sys/dev/raid/speed_limit_max > ++ p=2000 > ++ echo 20000 > ++ case $* in > ++ /tmp/mdadm/mdadm-3.4/mdadm --quiet -S /dev/md0 > ++ rv=1 > ++ case $* in > ++ udevadm settle > ++ echo 2000 > ++ cat /var/tmp/stderr > ++ return 1 > ++ mdadm -B /dev/md0 -l 1 --assume-clean -n2 /dev/loop0 /dev/loop1 > ++ rm -f /var/tmp/stderr > ++ case $* in > ++ case $* in > ++ /tmp/mdadm/mdadm-3.4/mdadm --quiet -B /dev/md0 -l 1 --assume-clean > -n2 /dev/loop0 /dev/loop1 > ++ rv=1 > > ... > > The bigger problem is that 01replace hangs forever. Looking at my > process list: > root 16064 2 0 22:45 ? 00:00:00 [md0_raid1] > root 16093 16049 0 22:45 pts/1 00:00:00 > /tmp/mdadm/mdadm-3.4/mdadm --quiet /dev/md0 --remove /dev/loop1 > > The --remove operation never completes. > > $ cat /proc/mdstat > Personalities : [raid1] [raid10] [raid6] [raid5] [raid4] [linear] [raid0] > md0 : active raid1 loop5[5] loop4[4](S) loop3[3] loop2[2] loop1[1](F) loop0[0] > 19968 blocks super 1.2 [4/4] [UUUU] > > Can someone help me figure out why the regression tests give these > problems. kernel issue? test program issue? internal issue? > > The kernel was built with: > > CONFIG_MD_AUTODETECT=y > CONFIG_MD_LINEAR=m > CONFIG_MD_RAID0=m > CONFIG_MD_RAID1=y > CONFIG_MD_RAID10=y > CONFIG_MD_RAID456=y > # CONFIG_MD_MULTIPATH is not set > # CONFIG_MD_FAULTY is not set > > Are there other options needed? > > Thanks for any help. Nobody here have a clue what kernel you are running - giving us a snippet of the .config and no detail about the kernel version is rather useless. Jes -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
