Re: Advice requested re: hard drive setup for RAID arrays

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04/11/15 19:36, Edward Kuns wrote:
> Is there a reasonable way of finding out if a shorter setting is
> appropriate for any specific drive?  Or would you say in general it's
> not worth the effort of trying to find out?  Would you expect this
> behavior to be any different for an SSD?

aiui,what matters is that the linux-level timeout is longer than the
disk timeout. Given that, the length of the linux timeout is irrelevant
- once the disk times out linux will handle the problem.

SSDs - I wouldn't have a clue ...

Cheers,
Wol
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux