Re: Raid 10 far 2 layout clarification.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2014-11-26 at 18:30 +0000, Wilson, Jonathan wrote:
> I just wanted to double check something before I return a failing SSD.
> 
> I set up a 2 partition raid 10 in far 2 mode... from what I understood
> it allows a mirror and stripe to exist on a 2 drive set up, so that it
> gets the benefits of stripe with the redundancy of mirror.

I should clarify, two partitions on two different SSD's not the same
SSD :-/   /sda4 and /sdb4

> 
> I just wanted to double check this was correct and if so confirm that I
> can fail and remove one of the drives.
> 
> Obvioulsy I will have to drop one of the drives anyway/somehow but if it
> wont hold up/keep running after failing one drive then I will have to
> deal with it in another way, probably a quick clone onto a spare disk as
> a stop gap measure until I get the replacement, as this array is my OS
> disk.
> 
> Jon.
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux