Yes I did wait for the syncing to complete before accessing md0.
I had the seeks during the syncing and afterwards when reading or
writing to the array.
Patrick
Quoting Robin Hill <robin@xxxxxxxxxxxxxxx>:
On Tue Oct 07, 2014 at 06:44:49AM +0200, P. Gautschi wrote:
I've created a RAID5 on 5 identical SATA disks. Doing some
performance measurements
with dd I get a disappointing performance.
A dd with bs=1M on a btrfs created on md0 transfers about 110 MB/s.
(both read and write)
A dd on md0 has the same write speed but only about 20 MB/s on read.
In all of the tests I hear the disk constantly seeking. This was
also the case
during creation of the array.
I also created a RAID4 to make sure that I doesn't get fooled by
the stripe layout of RAID5.
Now I get about 110 MB/s for write and 230 MB/s for read on md0.
But the constant
seeking is still present for both read and write and during
creation of the array.
Why are the disk perform so many seek operations? I think a
sequential access on md0 should
cause a sequential access on the individual disk.
I have to add that I did something unusual: I created the RAID4/5
with a chunk size of 4KiB.
The idea of this was that when I'm going to use btrfs with the
default nodesize of 16KiB
all node write will fill a full stripe and there won't be any RMW
at all. (both fortunate
for performance and integrity in a power loss situation.)
Nevertheless I think a sequential access on the array should cause
a sequential access on the
disks for any chunk size if the read/write block size is a exact multiple of
the (numdisks-1)*chunk size.
Is there any explanation for the seeks and how do I get rid of them?
After creating the arrays did you wait for them to finish syncing? The
array is created in degraded mode initially and then rebuilds onto the
additional disk (this is the fastest way to do things, unless you know
the disks are all zeroed initially). Until this rebuild is complete then
it'll be competing with any other disk activity.
Cheers,
Robin
--
___
( ' } | Robin Hill <robin@xxxxxxxxxxxxxxx> |
/ / ) | Little Jim says .... |
// !! | "He fallen in de water !!" |
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
