AW: QNAP 8 port RAID5 md0 recovery of missing MBR and md superblocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Greetings to all

Phil solved my problem with his help

A bit diffusing was the problem of my partedMagic different /dev/sdx sorting:

QNAP Original: 
sda=ZXT
sdb=S13
sdc=P3E
sdd=ZB6
sde=GJN
sdf=PSN
sdg=WD
sdh=1NH


Parted Order=rebuildversion:
sda=ZB6
sdb=P3E
sdc=S13
sdd=ZXT
sde=GJN
sdf=PSN
sdg=WD
sdh=1NH

so:
mdadm --create --assume-clean --verbose /dev/md0 --chunk=64 --metadata=0.9 --level=5 --raid-devices=8 /dev/sdd3 missing /dev/sd{b,a,e,f,g,h}3

mdadm --assemble /dev/md0 --uuid=30358eff:ac9e6122:004291dc:e0ebbc5e

mdadm --detail --scan >> /etc/mdadm.conf

dd /dev/md0 /BACKUP/Pallmert.bin

worked and did the job and is currently saving the image for further inspection.

Thanks a lot!

Michael
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux