On 19/01/2014 20:46, Phil Turmel wrote:
On 01/19/2014 01:39 PM, Ron Leach wrote:
Assuming I am correct in needing something such as:
/dev/md0 for Grub, (and copied to both physical disks of the RAID-1)
/dev/md1 for the OS, and
I would use LVM here, too.
I wondered. Would also enable me to reserve much less space for the
OS and one or two small services that might be run there. I'll read
up on Grub over LVM, which is the only thing I'm not familiar with.
Should I proceed to partition the disks, and then create 3 RAID-1 arrays
(one on each partition-pair), or should I use a different
technique/layout to hold Grub, the OS, and an expandable LV for the
datafiles?
How were you booting when the two disks were a single array? Some other
device? If you can still do that, consider it.
It was another device - Debian on a separate single 250 GB sda. With
only 4 ports on the machine, and a wish to add another 2 x 3TB drives
for the LVM, it won't be available. Hence, I was working toward
putting the OS on the RAID1 array, but now looking into putting the OS
on the LVM, (as you suggest).
For the small systems I've built lately, I've set up modest twin SSDs to
handle boot, root, swap, database tablespaces, and mail storage. Then
added four or more large drives to handle media files. The SSDs have a
small partition for grub (raid1) and the balance in a single raid1 for
LVM.
Noted, thanks.
Oh, and don't forget a backup plan. Raid redundancy is *not* backup.
Understood. Incidentally, this server contains project file backups,
and is primarily a backup repository so that we can recover from
accidental deletion, or even retrieve previous project information for
re-examination (should it become necessary). We are not expecting to
stream anything (well, not to date, anyway) so I don't expect
bandwidth problems; we do have a lot of historic data including
photographs, and project emails. Relatively low traffic, but large
capacity, and available on demand. Additionally, we have a
full-retention policy, which is imposing the capacity demands on this
backup server. We use incremental backup, with rdiff-backup which
means that files once backed up don't get backed up again unless they
change.
From this machine, copies of the backup content will be made, in
rotation, and held offsite.
If you have bigger goals in mind, ignore me--do whatever Stan says
(seriously).
Stan posts on several of the lists we follow, and I always read his
contributions; many insights over the months and years.
Thanks for the guidance, and for confirming that separate RAID1s does
imply separate partitions on the physical devices. I've noted your
(and David's, in another post) concerns about bandwidth and RAM. I'll
look into booting into the LVM, that's new to me.
regards, Ron
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
