Re: Looking for help how to migrate 2disk RAID1 to 3 disk RAID6

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1/01/2014 17:54, Krzysztof Adamski wrote:
On Wed, 2014-01-01 at 14:02 +1300, Pieter De Wit wrote:
On 1/01/2014 13:51, Krzysztof Adamski wrote:
<snip>
Hi,

RAID Level 6 requires a minimum of 4 drives to implement

Cheers,

Pieter
I have seen messages by Neil from 2011 that he was planning to remove
this silly minimum requirement of 4 drive for RAID6.


IMHO, that "silly minimum requirement" *is* RAID6, 2xDATA, 2xPARITY. If you make it 1 DATA, then you might as well have RAID1 with a hot spare (not even sure how the calc's will work - for RAID6 like that, RAID1 is easy :) )

I would use RAID5 for now, then migrate to RAID6 when you get a forth drive. IIRC, you can always upgrade "up", not down (RAID numbers that is)

Cheers,

Pieter
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux