This is similar to 10ddf-fail-readd. The difference is that the array is stopped and incrementally assembled before the disk is re-added. --- tests/10ddf-fail-stop-readd | 66 +++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 66 insertions(+), 0 deletions(-) create mode 100644 tests/10ddf-fail-stop-readd diff --git a/tests/10ddf-fail-stop-readd b/tests/10ddf-fail-stop-readd new file mode 100644 index 0000000..4a0511a --- /dev/null +++ b/tests/10ddf-fail-stop-readd @@ -0,0 +1,66 @@ +# Simple fail / re-add test +. tests/env-ddf-template + +tmp=$(mktemp /tmp/mdtest-XXXXXX) +rm -f $tmp + +mdadm --zero-superblock $dev8 $dev9 +mdadm -CR $container -e ddf -l container -n 2 $dev8 $dev9 + +mdadm -CR $member0 -l raid1 -n 2 $container +#$dir/mdadm -CR $member0 -l raid1 -n 2 $container >/tmp/mdmon.txt 2>&1 + +# Write to the array +mke2fs $member0 +check wait + +set -- $(get_raiddisks $member0) +fail0=$1 +mdadm $member0 --fail $fail0 + +sleep 1 +mdadm $container --remove $fail0 + +set -- $(get_raiddisks $member0) +case $1 in MISSING) shift;; esac +good0=$1 + +mdadm -Ss + +sleep 1 +# Now simulate incremental assembly +mdadm -I $good0 +mdadm -IRs + +# Write to the array +mke2fs $member0 + +# We re-add the disk now +mdadm $container --add $fail0 + +sleep 1 +mdadm --wait $member0 + +ret=0 +set -- $(get_raiddisks $member0) +case $1:$2 in + $dev8:$dev9|$dev9:$dev8);; + *) echo ERROR: bad raid disks "$@"; ret=1;; +esac + +mdadm -Ss +for x in $@; do + mdadm -E $x >$tmp + if ! grep -q 'state\[0\] : Optimal, Consistent' $tmp; then + echo ERROR: member 0 should be optimal in meta data on $x + ret=1 + fi +done + +rm -f $tmp +if [ $ret -ne 0 ]; then + mdadm -E $dev8 + mdadm -E $dev9 +fi + +[ $ret -eq 0 ] -- 1.7.3.4 -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
