Phil:
Thank you for the information. This is my backup machine. Up to this
point I wasn't concerned about having a second copy of this machine, but
I have a tendency to decommission a computer and leave the backups on by
backuppc for archive purposes. I probably don't really, really need
anything on this PC. That said I'm am very paranoid that I will have
some other failure before I can resolve this :-(
I hadn't read anything about timing in disks in RAID - I'll have to go
do some research. I see WD has their RED series that appears to be
directed to this market.
Here is the information requested. Please let me know if this changes
anything in your instructions. I'll hold off until you confirm.
>1) Redo your "mdadm -E /dec/sdd1", as you cut off part of its output.
root@bkpr:~# mdadm -E /dev/sdd1
/dev/sdd1:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x0
Array UUID : 77965a25:38a24b98:9ab5899c:7795ded7
Name : bkp1:0
Creation Time : Fri May 31 11:06:39 2013
Raid Level : raid5
Raid Devices : 3
Avail Dev Size : 3906764976 (1862.89 GiB 2000.26 GB)
Array Size : 3906763776 (3725.78 GiB 4000.53 GB)
Used Dev Size : 3906763776 (1862.89 GiB 2000.26 GB)
Data Offset : 262144 sectors
Super Offset : 8 sectors
State : active
Device UUID : 1d29c79a:2a7c1bb3:130cbed5:9afce2e8
Update Time : Wed Sep 11 03:34:39 2013
Checksum : 8e8eabd9 - correct
Events : 308467
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 1
Array State : AAA ('A' == active, '.' == missing)
>2) show "for x in /sys/block/*/device/timeout ; do echo $x $(< $x) ;
done" to see your driver timeouts.
root@bkpr:~# for x in /sys/block/*/device/timeout ; do echo $x $(< $x) ;
done
/sys/block/sda/device/timeout 30
/sys/block/sdb/device/timeout 30
/sys/block/sdc/device/timeout 30
/sys/block/sdd/device/timeout 30
/sys/block/sde/device/timeout 30
/sys/block/sdf/device/timeout 30
/sys/block/sdg/device/timeout 30
/sys/block/sdh/device/timeout 30
/sys/block/sdi/device/timeout 30
We're only interested in sdb/sdc/sdd for the array. sda is a 20GB IDE
drive as the boot/sys disk. f-i would be the USB live CD
>3) show "for x in sdb sdc sdd ; do echo $s ; smartctl -x /dev/$x ;
done" so we can see your drive health in detail, and the scterc
capability. (Sure to be none for the ST2000DM001 -- I have a couple of
those.)
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-2.6.32-21-generic] (local
build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda LP
Device Model: ST32000542AS
Serial Number: 5XW21KAF
LU WWN Device Id: 5 000c50 02ecc7806
Firmware Version: CC34
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sun Sep 15 14:14:44 2013 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 643) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 118 099 006 - 194290954
3 Spin_Up_Time PO---- 100 100 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 223
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 094 060 030 - 2889012633
9 Power_On_Hours -O--CK 076 076 000 - 21491
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 224
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 056 045 045 Past 44 (Min/Max
40/44)
194 Temperature_Celsius -O---K 044 055 000 - 44 (0 18 0 0)
195 Hardware_ECC_Recovered -O-RC- 046 021 000 - 194290954
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 140621524259782
241 Total_LBAs_Written ------ 100 253 000 - 1857243927
242 Total_LBAs_Read ------ 100 253 000 - 2508858022
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: scsi error
aborted command
Read GP Log Directory failed.
SMART Log Directory Version 1 [multi-sector log support]
SMART Log at address 0x00 has 1 sectors [Log Directory]
SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log]
SMART Log at address 0x03 has 5 sectors [Ext. Comprehensive SMART
error log]
SMART Log at address 0x06 has 1 sectors [SMART self-test log]
SMART Log at address 0x07 has 1 sectors [Extended self-test log]
SMART Log at address 0x09 has 1 sectors [Selective self-test log]
SMART Log at address 0x10 has 1 sectors [NCQ Command Error]
SMART Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
SMART Log at address 0x21 has 1 sectors [Write stream error log]
SMART Log at address 0x22 has 1 sectors [Read stream error log]
SMART Log at address 0x80 has 16 sectors [Host vendor specific log]
SMART Log at address 0x81 has 16 sectors [Host vendor specific log]
SMART Log at address 0x82 has 16 sectors [Host vendor specific log]
SMART Log at address 0x83 has 16 sectors [Host vendor specific log]
SMART Log at address 0x84 has 16 sectors [Host vendor specific log]
SMART Log at address 0x85 has 16 sectors [Host vendor specific log]
SMART Log at address 0x86 has 16 sectors [Host vendor specific log]
SMART Log at address 0x87 has 16 sectors [Host vendor specific log]
SMART Log at address 0x88 has 16 sectors [Host vendor specific log]
SMART Log at address 0x89 has 16 sectors [Host vendor specific log]
SMART Log at address 0x8a has 16 sectors [Host vendor specific log]
SMART Log at address 0x8b has 16 sectors [Host vendor specific log]
SMART Log at address 0x8c has 16 sectors [Host vendor specific log]
SMART Log at address 0x8d has 16 sectors [Host vendor specific log]
SMART Log at address 0x8e has 16 sectors [Host vendor specific log]
SMART Log at address 0x8f has 16 sectors [Host vendor specific log]
SMART Log at address 0x90 has 16 sectors [Host vendor specific log]
SMART Log at address 0x91 has 16 sectors [Host vendor specific log]
SMART Log at address 0x92 has 16 sectors [Host vendor specific log]
SMART Log at address 0x93 has 16 sectors [Host vendor specific log]
SMART Log at address 0x94 has 16 sectors [Host vendor specific log]
SMART Log at address 0x95 has 16 sectors [Host vendor specific log]
SMART Log at address 0x96 has 16 sectors [Host vendor specific log]
SMART Log at address 0x97 has 16 sectors [Host vendor specific log]
SMART Log at address 0x98 has 16 sectors [Host vendor specific log]
SMART Log at address 0x99 has 16 sectors [Host vendor specific log]
SMART Log at address 0x9a has 16 sectors [Host vendor specific log]
SMART Log at address 0x9b has 16 sectors [Host vendor specific log]
SMART Log at address 0x9c has 16 sectors [Host vendor specific log]
SMART Log at address 0x9d has 16 sectors [Host vendor specific log]
SMART Log at address 0x9e has 16 sectors [Host vendor specific log]
SMART Log at address 0x9f has 16 sectors [Host vendor specific log]
SMART Log at address 0xa1 has 20 sectors [Device vendor specific log]
SMART Log at address 0xa8 has 129 sectors [Device vendor specific log]
SMART Log at address 0xa9 has 1 sectors [Device vendor specific log]
SMART Log at address 0xbd has 252 sectors [Device vendor specific log]
SMART Log at address 0xc0 has 1 sectors [Device vendor specific log]
SMART Log at address 0xe0 has 1 sectors [SCT Command/Status]
SMART Log at address 0xe1 has 1 sectors [SCT Data Transfer]
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log Version: 1
No Errors Logged
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 21425 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 44 Celsius
Power Cycle Min/Max Temperature: 40/44 Celsius
Lifetime Min/Max Temperature: 18/55 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 10 minutes
Temperature Logging Interval: 59 minutes
Min/Max recommended Temperature: 14/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 128 (19)
Index Estimated Time Temperature Celsius
20 2013-09-10 08:24 45 **************************
21 2013-09-10 09:23 44 *************************
... ..( 7 skipped). .. *************************
29 2013-09-10 17:15 44 *************************
30 2013-09-10 18:14 45 **************************
31 2013-09-10 19:13 47 ****************************
32 2013-09-10 20:12 46 ***************************
33 2013-09-10 21:11 48 *****************************
34 2013-09-10 22:10 51 ********************************
35 2013-09-10 23:09 51 ********************************
36 2013-09-11 00:08 50 *******************************
37 2013-09-11 01:07 47 ****************************
38 2013-09-11 02:06 45 **************************
39 2013-09-11 03:05 49 ******************************
40 2013-09-11 04:04 46 ***************************
41 2013-09-11 05:03 45 **************************
42 2013-09-11 06:02 45 **************************
43 2013-09-11 07:01 49 ******************************
44 2013-09-11 08:00 50 *******************************
45 2013-09-11 08:59 50 *******************************
46 2013-09-11 09:58 49 ******************************
47 2013-09-11 10:57 46 ***************************
48 2013-09-11 11:56 45 **************************
... ..( 5 skipped). .. **************************
54 2013-09-11 17:50 45 **************************
55 2013-09-11 18:49 47 ****************************
56 2013-09-11 19:48 47 ****************************
57 2013-09-11 20:47 47 ****************************
58 2013-09-11 21:46 50 *******************************
59 2013-09-11 22:45 51 ********************************
60 2013-09-11 23:44 50 *******************************
61 2013-09-12 00:43 50 *******************************
62 2013-09-12 01:42 46 ***************************
63 2013-09-12 02:41 49 ******************************
64 2013-09-12 03:40 48 *****************************
65 2013-09-12 04:39 45 **************************
... ..( 12 skipped). .. **************************
78 2013-09-12 17:26 45 **************************
79 2013-09-12 18:25 47 ****************************
80 2013-09-12 19:24 50 *******************************
81 2013-09-12 20:23 48 *****************************
82 2013-09-12 21:22 50 *******************************
83 2013-09-12 22:21 51 ********************************
84 2013-09-12 23:20 50 *******************************
85 2013-09-13 00:19 48 *****************************
86 2013-09-13 01:18 46 ***************************
87 2013-09-13 02:17 49 ******************************
88 2013-09-13 03:16 47 ****************************
89 2013-09-13 04:15 45 **************************
... ..( 7 skipped). .. **************************
97 2013-09-13 12:07 45 **************************
98 2013-09-13 13:06 46 ***************************
99 2013-09-13 14:05 45 **************************
100 2013-09-13 15:04 45 **************************
101 2013-09-13 16:03 46 ***************************
102 2013-09-13 17:02 49 ******************************
103 2013-09-13 18:01 51 ********************************
104 2013-09-13 19:00 52 *********************************
105 2013-09-13 19:59 48 *****************************
106 2013-09-13 20:58 51 ********************************
107 2013-09-13 21:57 51 ********************************
108 2013-09-13 22:56 49 ******************************
109 2013-09-13 23:55 46 ***************************
110 2013-09-14 00:54 46 ***************************
111 2013-09-14 01:53 46 ***************************
112 2013-09-14 02:52 45 **************************
... ..( 5 skipped). .. **************************
118 2013-09-14 08:46 45 **************************
119 2013-09-14 09:45 46 ***************************
... ..( 4 skipped). .. ***************************
124 2013-09-14 14:40 46 ***************************
125 2013-09-14 15:39 45 **************************
126 2013-09-14 16:38 ? -
127 2013-09-14 17:37 45 **************************
0 2013-09-14 18:36 ? -
1 2013-09-14 19:35 44 *************************
2 2013-09-14 20:34 ? -
3 2013-09-14 21:33 22 ***
4 2013-09-14 22:32 ? -
5 2013-09-14 23:31 27 ********
6 2013-09-15 00:30 ? -
7 2013-09-15 01:29 27 ********
8 2013-09-15 02:28 ? -
9 2013-09-15 03:27 40 *********************
10 2013-09-15 04:26 ? -
11 2013-09-15 05:25 40 *********************
12 2013-09-15 06:24 ? -
13 2013-09-15 07:23 40 *********************
14 2013-09-15 08:22 ? -
15 2013-09-15 09:21 40 *********************
16 2013-09-15 10:20 40 *********************
17 2013-09-15 11:19 44 *************************
18 2013-09-15 12:18 44 *************************
19 2013-09-15 13:17 44 *************************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
SATA Phy Event Counters (GP Log 0x11) not supported
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-2.6.32-21-generic] (local
build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: ST2000DM001-1CH164
Serial Number: Z1E27DHL
LU WWN Device Id: 5 000c50 04f1ae32f
Firmware Version: CC24
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sun Sep 15 14:14:44 2013 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 584) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 221) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 117 099 006 - 125736168
3 Spin_Up_Time PO---- 096 096 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 14
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 076 060 030 - 13007233819
9 Power_On_Hours -O--CK 098 098 000 - 2592
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 14
183 Runtime_Bad_Block -O--CK 099 099 000 - 1
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
189 High_Fly_Writes -O-RCK 097 097 000 - 3
190 Airflow_Temperature_Cel -O---K 053 040 045 Past 47 (16 76
47 41)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 14
193 Load_Cycle_Count -O--CK 100 100 000 - 49
194 Temperature_Celsius -O---K 047 060 000 - 47 (0 20 0 0)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 108306190305758
241 Total_LBAs_Written ------ 100 253 000 - 10738051480
242 Total_LBAs_Read ------ 100 253 000 - 22593654149
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: scsi error
aborted command
Read GP Log Directory failed.
SMART Log Directory Version 1 [multi-sector log support]
SMART Log at address 0x00 has 1 sectors [Log Directory]
SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log]
SMART Log at address 0x06 has 1 sectors [SMART self-test log]
SMART Log at address 0x09 has 1 sectors [Selective self-test log]
SMART Log at address 0x80 has 16 sectors [Host vendor specific log]
SMART Log at address 0x81 has 16 sectors [Host vendor specific log]
SMART Log at address 0x82 has 16 sectors [Host vendor specific log]
SMART Log at address 0x83 has 16 sectors [Host vendor specific log]
SMART Log at address 0x84 has 16 sectors [Host vendor specific log]
SMART Log at address 0x85 has 16 sectors [Host vendor specific log]
SMART Log at address 0x86 has 16 sectors [Host vendor specific log]
SMART Log at address 0x87 has 16 sectors [Host vendor specific log]
SMART Log at address 0x88 has 16 sectors [Host vendor specific log]
SMART Log at address 0x89 has 16 sectors [Host vendor specific log]
SMART Log at address 0x8a has 16 sectors [Host vendor specific log]
SMART Log at address 0x8b has 16 sectors [Host vendor specific log]
SMART Log at address 0x8c has 16 sectors [Host vendor specific log]
SMART Log at address 0x8d has 16 sectors [Host vendor specific log]
SMART Log at address 0x8e has 16 sectors [Host vendor specific log]
SMART Log at address 0x8f has 16 sectors [Host vendor specific log]
SMART Log at address 0x90 has 16 sectors [Host vendor specific log]
SMART Log at address 0x91 has 16 sectors [Host vendor specific log]
SMART Log at address 0x92 has 16 sectors [Host vendor specific log]
SMART Log at address 0x93 has 16 sectors [Host vendor specific log]
SMART Log at address 0x94 has 16 sectors [Host vendor specific log]
SMART Log at address 0x95 has 16 sectors [Host vendor specific log]
SMART Log at address 0x96 has 16 sectors [Host vendor specific log]
SMART Log at address 0x97 has 16 sectors [Host vendor specific log]
SMART Log at address 0x98 has 16 sectors [Host vendor specific log]
SMART Log at address 0x99 has 16 sectors [Host vendor specific log]
SMART Log at address 0x9a has 16 sectors [Host vendor specific log]
SMART Log at address 0x9b has 16 sectors [Host vendor specific log]
SMART Log at address 0x9c has 16 sectors [Host vendor specific log]
SMART Log at address 0x9d has 16 sectors [Host vendor specific log]
SMART Log at address 0x9e has 16 sectors [Host vendor specific log]
SMART Log at address 0x9f has 16 sectors [Host vendor specific log]
SMART Log at address 0xa1 has 20 sectors [Device vendor specific log]
SMART Log at address 0xa8 has 129 sectors [Device vendor specific log]
SMART Log at address 0xa9 has 1 sectors [Device vendor specific log]
SMART Log at address 0xc0 has 1 sectors [Device vendor specific log]
SMART Log at address 0xc1 has 10 sectors [Device vendor specific log]
SMART Log at address 0xc4 has 5 sectors [Device vendor specific log]
SMART Log at address 0xe0 has 1 sectors [SCT Command/Status]
SMART Log at address 0xe1 has 1 sectors [SCT Data Transfer]
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log Version: 1
No Errors Logged
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 2526 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Warning: device does not support SCT Data Table command
Warning: device does not support SCT Error Recovery Control command
SATA Phy Event Counters (GP Log 0x11) not supported
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-2.6.32-21-generic] (local
build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda LP
Device Model: ST32000542AS
Serial Number: 5XW24A5V
LU WWN Device Id: 5 000c50 02ece5bf0
Firmware Version: CC34
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sun Sep 15 14:14:44 2013 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 633) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 095 095 006 - 164677781
3 Spin_Up_Time PO---- 100 100 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 223
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 094 060 030 - 2933855450
9 Power_On_Hours -O--CK 075 075 000 - 22657
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 224
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 001 001 000 - 211
188 Command_Timeout -O--CK 100 099 000 - 4295032835
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 053 042 045 Past 47 (17 206
47 42)
194 Temperature_Celsius -O---K 047 058 000 - 47 (0 18 0 0)
195 Hardware_ECC_Recovered -O-RC- 041 024 000 - 164677781
197 Current_Pending_Sector -O--C- 098 095 000 - 91
198 Offline_Uncorrectable ----C- 098 095 000 - 91
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 163088498186598
241 Total_LBAs_Written ------ 100 253 000 - 2802097688
242 Total_LBAs_Read ------ 100 253 000 - 189741710
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: scsi error
aborted command
Read GP Log Directory failed.
SMART Log Directory Version 1 [multi-sector log support]
SMART Log at address 0x00 has 1 sectors [Log Directory]
SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log]
SMART Log at address 0x03 has 5 sectors [Ext. Comprehensive SMART
error log]
SMART Log at address 0x06 has 1 sectors [SMART self-test log]
SMART Log at address 0x07 has 1 sectors [Extended self-test log]
SMART Log at address 0x09 has 1 sectors [Selective self-test log]
SMART Log at address 0x10 has 1 sectors [NCQ Command Error]
SMART Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
SMART Log at address 0x21 has 1 sectors [Write stream error log]
SMART Log at address 0x22 has 1 sectors [Read stream error log]
SMART Log at address 0x80 has 16 sectors [Host vendor specific log]
SMART Log at address 0x81 has 16 sectors [Host vendor specific log]
SMART Log at address 0x82 has 16 sectors [Host vendor specific log]
SMART Log at address 0x83 has 16 sectors [Host vendor specific log]
SMART Log at address 0x84 has 16 sectors [Host vendor specific log]
SMART Log at address 0x85 has 16 sectors [Host vendor specific log]
SMART Log at address 0x86 has 16 sectors [Host vendor specific log]
SMART Log at address 0x87 has 16 sectors [Host vendor specific log]
SMART Log at address 0x88 has 16 sectors [Host vendor specific log]
SMART Log at address 0x89 has 16 sectors [Host vendor specific log]
SMART Log at address 0x8a has 16 sectors [Host vendor specific log]
SMART Log at address 0x8b has 16 sectors [Host vendor specific log]
SMART Log at address 0x8c has 16 sectors [Host vendor specific log]
SMART Log at address 0x8d has 16 sectors [Host vendor specific log]
SMART Log at address 0x8e has 16 sectors [Host vendor specific log]
SMART Log at address 0x8f has 16 sectors [Host vendor specific log]
SMART Log at address 0x90 has 16 sectors [Host vendor specific log]
SMART Log at address 0x91 has 16 sectors [Host vendor specific log]
SMART Log at address 0x92 has 16 sectors [Host vendor specific log]
SMART Log at address 0x93 has 16 sectors [Host vendor specific log]
SMART Log at address 0x94 has 16 sectors [Host vendor specific log]
SMART Log at address 0x95 has 16 sectors [Host vendor specific log]
SMART Log at address 0x96 has 16 sectors [Host vendor specific log]
SMART Log at address 0x97 has 16 sectors [Host vendor specific log]
SMART Log at address 0x98 has 16 sectors [Host vendor specific log]
SMART Log at address 0x99 has 16 sectors [Host vendor specific log]
SMART Log at address 0x9a has 16 sectors [Host vendor specific log]
SMART Log at address 0x9b has 16 sectors [Host vendor specific log]
SMART Log at address 0x9c has 16 sectors [Host vendor specific log]
SMART Log at address 0x9d has 16 sectors [Host vendor specific log]
SMART Log at address 0x9e has 16 sectors [Host vendor specific log]
SMART Log at address 0x9f has 16 sectors [Host vendor specific log]
SMART Log at address 0xa1 has 20 sectors [Device vendor specific log]
SMART Log at address 0xa8 has 129 sectors [Device vendor specific log]
SMART Log at address 0xa9 has 1 sectors [Device vendor specific log]
SMART Log at address 0xbd has 252 sectors [Device vendor specific log]
SMART Log at address 0xc0 has 1 sectors [Device vendor specific log]
SMART Log at address 0xe0 has 1 sectors [SCT Command/Status]
SMART Log at address 0xe1 has 1 sectors [SCT Data Transfer]
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log Version: 1
ATA Error Count: 204 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 204 occurred at disk power-on lifetime: 22591 hours (941 days + 7
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 c0 08 00 00 Error: UNC at LBA = 0x000008c0 = 2240
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 0b 00 c0 08 00 e0 00 00:42:42.402 READ VERIFY SECTOR(S) EXT
42 0b 00 bd 08 00 e0 00 00:42:38.690 READ VERIFY SECTOR(S) EXT
42 0b 00 ba 08 00 e0 00 00:42:35.017 READ VERIFY SECTOR(S) EXT
42 0b 00 b7 08 00 e0 00 00:42:31.314 READ VERIFY SECTOR(S) EXT
42 0b 00 b5 08 00 e0 00 00:42:27.631 READ VERIFY SECTOR(S) EXT
Error 203 occurred at disk power-on lifetime: 22591 hours (941 days + 7
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 bf 08 00 00 Error: UNC at LBA = 0x000008bf = 2239
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 0b 00 bd 08 00 e0 00 00:42:38.690 READ VERIFY SECTOR(S) EXT
42 0b 00 ba 08 00 e0 00 00:42:35.017 READ VERIFY SECTOR(S) EXT
42 0b 00 b7 08 00 e0 00 00:42:31.314 READ VERIFY SECTOR(S) EXT
42 0b 00 b5 08 00 e0 00 00:42:27.631 READ VERIFY SECTOR(S) EXT
42 0b 00 b4 08 00 e0 00 00:42:23.908 READ VERIFY SECTOR(S) EXT
Error 202 occurred at disk power-on lifetime: 22591 hours (941 days + 7
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 bc 08 00 00 Error: UNC at LBA = 0x000008bc = 2236
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 0b 00 ba 08 00 e0 00 00:42:35.017 READ VERIFY SECTOR(S) EXT
42 0b 00 b7 08 00 e0 00 00:42:31.314 READ VERIFY SECTOR(S) EXT
42 0b 00 b5 08 00 e0 00 00:42:27.631 READ VERIFY SECTOR(S) EXT
42 0b 00 b4 08 00 e0 00 00:42:23.908 READ VERIFY SECTOR(S) EXT
42 0b 00 b0 08 00 e0 00 00:42:20.225 READ VERIFY SECTOR(S) EXT
Error 201 occurred at disk power-on lifetime: 22591 hours (941 days + 7
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 b9 08 00 00 Error: UNC at LBA = 0x000008b9 = 2233
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 0b 00 b7 08 00 e0 00 00:42:31.314 READ VERIFY SECTOR(S) EXT
42 0b 00 b5 08 00 e0 00 00:42:27.631 READ VERIFY SECTOR(S) EXT
42 0b 00 b4 08 00 e0 00 00:42:23.908 READ VERIFY SECTOR(S) EXT
42 0b 00 b0 08 00 e0 00 00:42:20.225 READ VERIFY SECTOR(S) EXT
42 0b 00 af 08 00 e0 00 00:42:16.513 READ VERIFY SECTOR(S) EXT
Error 200 occurred at disk power-on lifetime: 22591 hours (941 days + 7
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 b6 08 00 00 Error: UNC at LBA = 0x000008b6 = 2230
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 0b 00 b5 08 00 e0 00 00:42:27.631 READ VERIFY SECTOR(S) EXT
42 0b 00 b4 08 00 e0 00 00:42:23.908 READ VERIFY SECTOR(S) EXT
42 0b 00 b0 08 00 e0 00 00:42:20.225 READ VERIFY SECTOR(S) EXT
42 0b 00 af 08 00 e0 00 00:42:16.513 READ VERIFY SECTOR(S) EXT
42 0b 00 ae 08 00 e0 00 00:42:12.850 READ VERIFY SECTOR(S) EXT
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 22591
2241
# 2 Short offline Completed: read failure 90% 22591
2058
# 3 Short offline Completed: read failure 90% 22591
2058
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 47 Celsius
Power Cycle Min/Max Temperature: 42/47 Celsius
Lifetime Min/Max Temperature: 18/58 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 10 minutes
Temperature Logging Interval: 59 minutes
Min/Max recommended Temperature: 14/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 128 (20)
Index Estimated Time Temperature Celsius
21 2013-09-10 08:24 49 ******************************
22 2013-09-10 09:23 48 *****************************
... ..( 7 skipped). .. *****************************
30 2013-09-10 17:15 48 *****************************
31 2013-09-10 18:14 49 ******************************
32 2013-09-10 19:13 50 *******************************
33 2013-09-10 20:12 51 ********************************
34 2013-09-10 21:11 50 *******************************
35 2013-09-10 22:10 55 ************************************
36 2013-09-10 23:09 55 ************************************
37 2013-09-11 00:08 54 ***********************************
38 2013-09-11 01:07 52 *********************************
39 2013-09-11 02:06 50 *******************************
40 2013-09-11 03:05 53 **********************************
41 2013-09-11 04:04 51 ********************************
42 2013-09-11 05:03 50 *******************************
43 2013-09-11 06:02 49 ******************************
44 2013-09-11 07:01 54 ***********************************
45 2013-09-11 08:00 55 ************************************
46 2013-09-11 08:59 55 ************************************
47 2013-09-11 09:58 53 **********************************
48 2013-09-11 10:57 50 *******************************
49 2013-09-11 11:56 49 ******************************
... ..( 5 skipped). .. ******************************
55 2013-09-11 17:50 49 ******************************
56 2013-09-11 18:49 50 *******************************
57 2013-09-11 19:48 52 *********************************
58 2013-09-11 20:47 51 ********************************
59 2013-09-11 21:46 55 ************************************
60 2013-09-11 22:45 56 *************************************
61 2013-09-11 23:44 55 ************************************
62 2013-09-12 00:43 55 ************************************
63 2013-09-12 01:42 52 *********************************
64 2013-09-12 02:41 52 *********************************
65 2013-09-12 03:40 54 ***********************************
66 2013-09-12 04:39 50 *******************************
67 2013-09-12 05:38 49 ******************************
... ..( 11 skipped). .. ******************************
79 2013-09-12 17:26 49 ******************************
80 2013-09-12 18:25 50 *******************************
81 2013-09-12 19:24 55 ************************************
82 2013-09-12 20:23 52 *********************************
83 2013-09-12 21:22 55 ************************************
84 2013-09-12 22:21 56 *************************************
85 2013-09-12 23:20 55 ************************************
86 2013-09-13 00:19 54 ***********************************
87 2013-09-13 01:18 51 ********************************
88 2013-09-13 02:17 52 *********************************
89 2013-09-13 03:16 53 **********************************
90 2013-09-13 04:15 50 *******************************
91 2013-09-13 05:14 49 ******************************
... ..( 3 skipped). .. ******************************
95 2013-09-13 09:10 49 ******************************
96 2013-09-13 10:09 50 *******************************
97 2013-09-13 11:08 50 *******************************
98 2013-09-13 12:07 49 ******************************
... ..( 3 skipped). .. ******************************
102 2013-09-13 16:03 49 ******************************
103 2013-09-13 17:02 53 **********************************
104 2013-09-13 18:01 56 *************************************
105 2013-09-13 19:00 57 **************************************
106 2013-09-13 19:59 53 **********************************
107 2013-09-13 20:58 56 *************************************
108 2013-09-13 21:57 56 *************************************
109 2013-09-13 22:56 56 *************************************
110 2013-09-13 23:55 51 ********************************
111 2013-09-14 00:54 51 ********************************
112 2013-09-14 01:53 50 *******************************
113 2013-09-14 02:52 50 *******************************
114 2013-09-14 03:51 49 ******************************
... ..( 4 skipped). .. ******************************
119 2013-09-14 08:46 49 ******************************
120 2013-09-14 09:45 50 *******************************
... ..( 5 skipped). .. *******************************
126 2013-09-14 15:39 50 *******************************
127 2013-09-14 16:38 ? -
0 2013-09-14 17:37 49 ******************************
1 2013-09-14 18:36 ? -
2 2013-09-14 19:35 48 *****************************
3 2013-09-14 20:34 ? -
4 2013-09-14 21:33 22 ***
5 2013-09-14 22:32 ? -
6 2013-09-14 23:31 27 ********
7 2013-09-15 00:30 ? -
8 2013-09-15 01:29 28 *********
9 2013-09-15 02:28 ? -
10 2013-09-15 03:27 42 ***********************
11 2013-09-15 04:26 ? -
12 2013-09-15 05:25 42 ***********************
13 2013-09-15 06:24 ? -
14 2013-09-15 07:23 42 ***********************
15 2013-09-15 08:22 ? -
16 2013-09-15 09:21 42 ***********************
17 2013-09-15 10:20 42 ***********************
18 2013-09-15 11:19 45 **************************
19 2013-09-15 12:18 47 ****************************
20 2013-09-15 13:17 47 ****************************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
SATA Phy Event Counters (GP Log 0x11) not supported
HTH, Phil
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
