Hey, > -----Original Message----- > From: NeilBrown [mailto:neilb@xxxxxxx] > Sent: Monday, August 19, 2013 10:04 AM > To: Blaesing, Matthias (KC-IT) > Cc: linux-raid@xxxxxxxxxxxxxxx > Subject: Re: Recovery of RAID1 fails (added disks stays as spare) > > On Mon, 19 Aug 2013 07:48:20 +0000 <Matthias.Blaesing@xxxxxxxxxx> wrote: > > > Hey, > > > > Strange. I would definitely have expected one of those to start the > > > recovery. > > > Does anything appear in the kernel logs (e.g. output of 'dmesg')? > > > > Please see the attaches boot.msg - from my perspective it only > confirms the results > > gained from the /proc/mdstat and mdadm output. > > I guess I should have been more explicit. > It looks like you have just attached a log of what happened at boot. > I mean does anything appear in the dmesg output when you try to add the > spare > device to the array. You mean this (the first lines should be the result of mdadm --fail and mdadm --remove): Aug 19 10:54:28 s15434194 kernel: [2149292.392602] md/raid1:md3: Disk failure on sda3, disabling device. Aug 19 10:54:28 s15434194 kernel: [2149292.392603] md/raid1:md3: Operation continuing on 1 devices. Aug 19 10:54:44 s15434194 kernel: [2149307.970181] md: unbind<sda3> Aug 19 10:54:44 s15434194 kernel: [2149308.033073] md: export_rdev(sda3) Aug 19 10:56:46 s15434194 kernel: [2149430.007318] md: bind<sda3> Aug 19 10:56:46 s15434194 kernel: [2149430.043534] RAID1 conf printout: Aug 19 10:56:46 s15434194 kernel: [2149430.043542] --- wd:1 rd:2 Aug 19 10:56:46 s15434194 kernel: [2149430.043549] disk 0, wo:0, o:1, dev:sdb3 Aug 19 10:56:46 s15434194 kernel: [2149430.043554] disk 1, wo:1, o:1, dev:sda3 Aug 19 10:56:46 s15434194 kernel: [2149430.043833] md: recovery of RAID array md3 Aug 19 10:56:46 s15434194 kernel: [2149430.043841] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. Aug 19 10:56:46 s15434194 kernel: [2149430.043847] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery. Aug 19 10:56:46 s15434194 kernel: [2149430.043857] md: using 128k window, over a total of 970888192k. Aug 20 02:27:56 s15434194 kernel: [2205289.321866] md: md3: recovery done. Aug 20 02:27:57 s15434194 kernel: [2205300.981062] RAID1 conf printout: Aug 20 02:27:57 s15434194 kernel: [2205300.981070] --- wd:1 rd:2 Aug 20 02:27:57 s15434194 kernel: [2205300.981077] disk 0, wo:0, o:1, dev:sdb3 Aug 20 02:27:57 s15434194 kernel: [2205300.981083] disk 1, wo:1, o:1, dev:sda3 Aug 20 02:27:57 s15434194 kernel: [2205301.025544] RAID1 conf printout: Aug 20 02:27:57 s15434194 kernel: [2205301.025551] --- wd:1 rd:2 Aug 20 02:27:57 s15434194 kernel: [2205301.025557] disk 0, wo:0, o:1, dev:sdb3 While rebuilding I also see read-errors from sdb: Aug 20 02:27:54 s15434194 kernel: [2205267.984530] md/raid1:md3: sdb: unrecoverable I/O read error for block 1941766272 I guess as this affects the source, it should not affect the move of sda to be active. Mit freundlichen Grüßen Matthias Bläsing Abt IT KompetenzCenter Tel.: 02351 950-344 Fax.: 02351 950-222 mailto: matthias.blaesing@xxxxxxxxxx www.persona.de persona service Verwaltungs AG & Co. KG Freisenbergstra� 31 � 58513 L�heid Tel.: (02351) 950-0 � Fax: (02351) 950-222 Sitz L�heid � Registergericht Iserlohn, HRA Nr. 2930 pers�ch haftende Gesellschafterin: persona service AG Gartenstra� 93 � CH-4002 Basel Handelsregister Basel, Nr. CH-270.3.012.836-8 diese vertreten durch den Verwaltungsrat: Georg Breucker (Pr�dent) und Dr. Sebastian Burckhardt www.persona.de ��.n��������+%������w��{.n�����{����w��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
