On Mar 20, 2013, at 6:04 PM, NeilBrown wrote: > On Wed, 20 Mar 2013 15:56:03 -0500 Brassow Jonathan <jbrassow@xxxxxxxxxx> > wrote: > >> >> On Mar 19, 2013, at 9:46 PM, NeilBrown wrote: >> >>> On Tue, 19 Mar 2013 16:15:35 -0500 Brassow Jonathan <jbrassow@xxxxxxxxxx> >>> wrote: >>> >>>> >>>> On Mar 17, 2013, at 6:49 PM, NeilBrown wrote: >>>> >>>>> On Wed, 13 Mar 2013 12:29:24 -0500 Jonathan Brassow <jbrassow@xxxxxxxxxx> >>>>> wrote: >>>>> >>>>>> Neil, >>>>>> >>>>>> I've noticed that when too many devices fail in a RAID arrary that >>>>>> addtional I/O will hang, yielding an endless supply of: >>>>>> Mar 12 11:52:53 bp-01 kernel: Buffer I/O error on device md1, logical block 3 >>>>>> Mar 12 11:52:53 bp-01 kernel: lost page write due to I/O error on md1 >>>>>> Mar 12 11:52:53 bp-01 kernel: sector=800 i=3 (null) (null) >>>>>> (null) (null) 1 >>>>> >>>>> This is the third report in as many weeks that mentions that WARN_ON. >>>>> The first two where quite different causes. >>>>> I think this one is the same as the first one, which means it would be fixed >>>>> by >>>>> md/raid5: schedule_construction should abort if nothing to do. >>>>> >>>>> which is commit 29d90fa2adbdd9f in linux-next. >>>> >>>> Sorry, I don't see this commit in linux-next: >>>> (the "for-next" branch of) git://github.com/neilbrown/linux.git >>>> or git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git >>>> >>>> Where should I be looking? >>> >>> Sorry, I probably messed up. >>> I meant this commit: >>> http://git.neil.brown.name/?p=md.git;a=commitdiff;h=ce7d363aaf1e28be8406a2976220944ca487e8ca >> >> Yes, I found this patch in 'for-next'. I tested 3.9.0-rc3 with and without this patch. The good news is that my issue with RAID5 appears to be fixed with this patch. To test, I simply created a 1GB RAID array, let it sync, killed all of the devices and then issued a 40M write request (4M block size). Before the patch, I would see the kernel warnings and it would take 7+ minutes to finish the 40M write. After the patch, I don't see the kernel warnings or call traces and it takes < 1 sec to finish the 40M write. That's good. Will this patch make it back to 3.[78]? >> >> However, I also found that RAID1 can take 2.5 min to perform the write and RAID10 can take 9+ min. Hung task messages with call traces and many many errors are the result. This is bad. I haven't figured out why these are so slow yet. > > What happens if you take RAID out of the picture? > i.e. write to a single device, then "kill" that device, then try issuing a > 40M write request to it. > > If that takes 2.5 minutes to resolve, then I think it is correct for RAID1 to > also take 2.5 minutes to resolve. > If it resolves much more quickly than it does with RAID1, then that is a > problem we should certainly address. The test is a little different because once you offline a device, you can't open it. So, I had to start I/O and then kill the device. I still get 158MB/s - 3 orders of magnitude faster than RAID1. Besides, if RAID10 takes 9+ minutes to complete, we'd still have something to fix. I have also tested this with an "error" device and it also returns in sub-second time. brassow [root@bp-01 ~]# off.sh sda Turning off sda [root@bp-01 ~]# dd if=/dev/zero of=/dev/sda1 bs=4M count=10 dd: opening `/dev/sda1': No such device or address [root@bp-01 ~]# on.sh sda Turning on sda [root@bp-01 ~]# dd if=/dev/zero of=/dev/sda bs=4M count=1000 & [1] 5203 [root@bp-01 ~]# off.sh sda Turning off sda [root@bp-01 ~]# 1000+0 records in 1000+0 records out 4194304000 bytes (4.2 GB) copied, 26.5564 s, 158 MB/s -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
