Re: RAID 0 of Two RAID 5s Stays Up When Component RAID fails

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Joel Young <jdy <at> cryregarder.com> writes:

> mdadm /dev/md0 --fail /dev/loop0
> mdadm /dev/md0 --fail /dev/loop1

I typod this when mailing the list.  It should have been:
mdadm /dev/md0 --fail /dev/loop1
mdadm /dev/md0 --fail /dev/loop2

In an off-list discussion with Neil Brown, he pointed out that
just as we don't fail a drive when a sector goes bad, we don't
fail a raid-0 if a component fails.

At this time, I don't follow that reasoning, but I can work
with it.

Joel

--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux