Re: Raid 5/10 discard support broken in 3.8.2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/03/13 03:56, Dave Cundiff wrote:
On Sat, Mar 9, 2013 at 12:26 AM, Brad Campbell
<lists2009@xxxxxxxxxxxxxxx> wrote:

I'd be interested if you could test it against 3.7.9.

I have a 6 drive RAID10. 3 Drives are on the on-board AHCI, and the other
three are on an LSI 9240-8i (SAS2008 with mpt2sas module).

TRIM is being passed down the stack as after an fstrim of the ext4 fs on the
RAID the mismatch count goes through the roof.

The 3 drives on the LSI are Intel 330 (which support deterministic read
after trim) while the drives on the AHCI are Samsung 830 (which are *not*
deterministic after trim).

My raid is 6 drives in an n2 configuration, so three pairs of mirrors. Each
one a Samsung and an Intel.


While I set this up could you let me know what you have in the
following sys files?

/sys/block/[mddevice]/discard_alignment
/sys/block/[mddevice]/queue/discard_granularity
/sys/block/[mddevice]/queue/discard_max_bytes

Also what chunk size is your array set to?


brad@srv:~$ cat /sys/block/md2/discard_alignment
32504832
brad@srv:~$ cat /sys/block/md2/queue/discard_granularity
33553920
brad@srv:~$ cat /sys/block/md2/queue/discard_max_bytes
65536

/dev/md2:
        Version : 1.2
  Creation Time : Fri Nov  9 15:49:44 2012
     Raid Level : raid10
     Array Size : 628752000 (599.62 GiB 643.84 GB)
  Used Dev Size : 209584000 (199.87 GiB 214.61 GB)
   Raid Devices : 6
  Total Devices : 6
    Persistence : Superblock is persistent

  Intent Bitmap : Internal

    Update Time : Sun Mar 10 12:49:41 2013
          State : active
 Active Devices : 6
Working Devices : 6
 Failed Devices : 0
  Spare Devices : 0

         Layout : near=2
     Chunk Size : 64K

           Name : unset:2
           UUID : 5a6bc3c5:f37768c6:909783aa:2c3fbd28
         Events : 23015

    Number   Major   Minor   RaidDevice State
       0       8        2        0      active sync set-A   /dev/sda2
       1      65       66        1      active sync set-B   /dev/sdu2
       2       8       18        2      active sync set-A   /dev/sdb2
       3      65       34        3      active sync set-B   /dev/sds2
       4       8       50        4      active sync set-A   /dev/sdd2
       5      65       50        5      active sync set-B   /dev/sdt2

Regards,
Brad
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux