Re: Huge values of mismatch_cnt on RAID 6 arrays under Fedora 18

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 28/01/13 03:26, Wolfgang Denk wrote:
I have seen "mismatch_cnt is not 0" warnings in the past, but that has
always been with RAID 1 arrays, and with relatively small numbers on
/sys/block/md*/md/mismatch_cnt; my understanding was that this was not
actually critical.

However, after updating to Fedora 18, I get this message from all
updated
systems that have RAID 6 arrays, and with _huge_ numbers of
mismatch_cnt, like that:

I saw this when I put two drives from a 10 drive RAID6 on a sil3124 card. Unfortunately by the time I figured out what was going on my array was trashed.

Massive mismatch counts are indicative of an insidious problem further down the storage stack. Check your drivers, cards, cables and PSU.

--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux