On 05/26/2012 08:07 PM, Dave Chinner wrote:
On Sat, May 26, 2012 at 07:25:55PM -0400, Joe Landman wrote:
[root@siFlash test]# ls -alF | wc -l
59
[root@siFlash test]# /usr/bin/time rm -f *
^C0.00user 8.46system 0:09.55elapsed 88%CPU (0avgtext+0avgdata
2384maxresident)k
25352inputs+0outputs (0major+179minor)pagefaults 0swaps
It's burning an awful lot of CPU time during this remove.
[root@siFlash test]# ls -alF | wc -l
48
So, 48 files were removed, it was basically CPU bound and one took
2.6 seconds.
So, how big are the files, and does the one that took 2.6s have tens
of thousands of extents ('xfs_bmap -vp *' will dump the extent maps
for all the files)?
Getting some sort of out of memory error with bmap
[root@siFlash test]# ls -alF
total 50466476
drwxr-xr-x 2 root root 4096 May 26 21:40 ./
drwxr-xr-x 3 root root 17 May 26 19:32 ../
-rw------- 1 root root 1073741824 May 26 19:36 2.r.49.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.50.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.51.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.52.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.53.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.54.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.55.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.56.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.57.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.58.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.59.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.60.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.61.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.62.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.63.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.64.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.65.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.66.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.67.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.68.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.69.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.70.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.71.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.72.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.73.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.74.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.75.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.76.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.77.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.78.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.79.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.80.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.81.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.82.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.83.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.84.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.85.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.86.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.87.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.88.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.89.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.90.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.91.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.92.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.93.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.94.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.95.0
-rw------- 1 root root 1073741824 May 26 19:36 2.r.96.0
-rw-r--r-- 1 root root 0 May 26 21:40 x
[root@siFlash test]# ls -alF > x
[root@siFlash test]# xfs_bmap -vp x
x:
EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL
FLAGS
0: [0..7]: 212681896..212681903 2 (7555752..7555759) 8
01111
[root@siFlash test]# xfs_bmap -vp 2.r.96.0
xfs_bmap: xfsctl(XFS_IOC_GETBMAPX) iflags=0x4 ["2.r.96.0"]: Cannot
allocate memory
These are 3.1.8 from git (had same error with earlier version).
if not, can you use perf top to get an ida of the CPU usage profile
duing the rm by doing:
# perf record rm -f *
.....
and capturing the profile via:
# perf report> profile.txt
And attaching te profile.txt file so we can see where all the CPU
time is being spent? You can find perf in your kernel source tree
under the tools subdir....
Cheers,
Dave.
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
