Re: raid10 issues after reorder of boot drives.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I am not sure how to proceed now with the output that shows possible
pairs as it won't allow me to setup all 8 devices on the array but only
4. Should I run the array creation with -x4 and set the available spare
devicesor or just create the array as I can remember which was one pair
from each controller. i.e /dev/sda3 /dev/sde3 ...?
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux