On 02/14/2012 01:42 PM, Joe Landman wrote:
On 02/14/2012 03:31 PM, NeilBrown wrote:
On Tue, 14 Feb 2012 10:30:37 -0700 Robert Woodworth
<robertjwoodworth@xxxxxxxxx> wrote:
Has anyone ever thought of integrating SES managed enclosures into the
kernel RAID system? I briefly looked through the archives and have
not found anything on the topic.
Some HW based RAID controllers do this flawlessly now, there is no
reason why the kernel RAID cannot also. (LSI MegaRAID)
1) When a drive is part if a managed enclosure, the RAID system should
address it by location instead of by enumerated device node. The SES
device in the enclosure can map the physical slot to a physical drive.
The RAID admin (mdamd) should be able to add/fail/identify devices
based on slot.
Does this just mean that the admin should using names in
/dev/disk/by-path/
rather than /dev/sdXX to address devices? What can md or mdadm do to
help?
Not sure on the SES (or SGPIO side), but one of the things we've been
doing has been to create a file with disk placement "coordinates", so
as to map serial number and device to physical location.
With real SES managed enclosures, you issue a SCSI command to read SES
Page1 and Page2 to get the details about the drives in any given slot.
This currently works fine in Linux with the sg_utils3 package. From the
command line, 'sg_ses -p 2 /dev/sgXX` where the device is the SES device.
Take a look at your systems, if you see a device at
/sys/class/enclosure/XXXX/ then you have a managed enclosure attached.
2) If the RAID system fails a drive, it should notify the SES
management and turn on the fail bit and the fail LED.
"mdadm --monitor" will run a script on drive failure. This could easily
notify the SES management.
Yes, we are using this now for notifications and logging.
So maybe all we need here is a script to plug in to mdadm... Would
you like
to write one?
Just need a "standard" SES (or SGPIO) mechanism to hook into, and we
should be able to support this. Right now we have to work through HBA
scripts.
A true managed enclosure has nothing to do with the HBA. A managed
enclosure provides a device on the SCSI bus and you exclusively
communicate with that device regardless of the HBA. Most HW RAIDs (LSI
MegaRAID) will hide the SES device exactly like they hide the physical
disks.
3) The RAID system should be able to turn on the 'identify' bit and
LEDs for an array or a single drive.
Again, it sounds like you just need a script to ask mdadm which
devices are
included in a given array, and then do whatever magic is needed to
turn on
the light.
It is fairly easy to extra the device list from the output of
mdadm --detail --brief --verbose /dev/md/whatever
but it might be good to make it easier to extra from
mdadm --detail --export /dev/md/whatever
Would you like to write such a script?
I'm currently doing firmware on a managed enclosure. Although my
vendor only supports LSI MegaRAID, there is no reason why my
enclosures cannot work in the same manner on a kernel RAID system.
Request for comments...
It sounds to me like you just need a few scripts to provide some
enclosure-specific functionality. I would be happy to include them
in the
mdadm distribution.
Or maybe there is something that I didn't understand??
Thanks,
NeilBrown
--
To unsubscribe from this list: send the line "unsubscribe
linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
