Hello! 1st post on this mailing list, so be gentle.
I've got a production Ubuntu box that I used the installer to create a
raid10 system on several months ago. I pretty much setup the box and
then left it alone, to run a couple of different things and some vm's.
I really started to realize something was wrong fairly recently when my
disk size was showing approx 1/2 of what I thought it should for a
raid10. Also, my disk speeds were... not something I'd expect for 4 drives.
After looking into it, I realized mdadm had marked two of the drives as
spares. WTF.
To make sure that I wasn't crazy, I wiped out a partition on each drive,
and created a raid10 by hand. My original system array is md0, the other
is md1.
----------------------------
josh@virtserver:~$ cat /proc/mdstat
Personalities : [raid0] [raid1] [raid10]
md1 : active raid10 sda2[0] sdd2[3] sdc2[2] sdb2[1]
46868480 blocks super 1.2 512K chunks 2 far-copies [4/4] [UUUU]
md0 : active raid10 sdd3[4](S) sdb3[3](S) sdc3[2] sda3[0]
951370752 blocks super 1.2 512K chunks 2 far-copies [2/2] [UU]
bitmap: 3/8 pages [12KB], 65536KB chunk
---------------------------
I notice the 2nd array I created is showing the raid1 and raid0
personalities... and I have a feeling that's what is gimping the md0 array?
I've tried fail/remove/adding those two partitions marked as spares, and
it never adds them back as active members.
HELP! :)
- Josh
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
