Hi all, My apologies if this is the wrong mailing list for this issue, but I figured my email would be lost in volume if I sent to 'linux-kernel'. In short, I had 2 SSDs in RAID 1, allocated as a single physical volume, which had a LVM logical volume mounted as the root partition. Six months later, one of the SSDs dies, and causes all of hell to break lose: [27087.234675] sd 0:0:0:0: [sda] Unhandled error code [27087.234686] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [27087.234688] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 68 53 88 00 00 08 00 [27087.234693] end_request: I/O error, dev sda, sector 6837128 ^^ repeated over 9000 times Instead of the disk being marked as failed and removed, the root partition was instead remounted as read-only, mdadm showed no problems, and required a reboot. Upon rebooting, RAID still hadn't marked the dying disk as failed or removed, and began to re-sync! root@vicky [/var/log] > cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md0 : active (auto-read-only) raid1 sdb1[0] sdc1[1] 78122967 blocks super 1.2 [2/2] [UU] On top of this, even though it was read-only, it kept giving this error for everything: root@vicky [/var/log] > shutdown bash: /sbin/shutdown: Input/output error I'm not sure if what I'm seeing here is normal, but thought I should at least try and ask - I can provide lots more info if needed (got a huge text file and several screenshots). Any feedback would be very much appreciated. Cal Leeming Simplicity Media Ltd ---------------------------- Here is the short smartctl dump of the disk: root@vicky [/home/foxx] > smartctl -a /dev/sda smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: M4-CT128M4SSD2 Serial Number: 00000000111603061D7B Firmware Version: 0001 User Capacity: 128,035,676,160 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 6 Local Time is: Tue Jan 3 13:54:46 2012 GMT SMART support is: Available - device has SMART capability. SMART support is: Enabled -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
