try raid10 with far layout 2011/8/15 Harald Nikolisin <hochglanz@xxxxxxxxx>: > Since a long time I'm unhappy with the performance of my RAID-1 system. > Investigation with atop and iostat unveils that the disk utilization is > always on a certain level although nothing happens on the system. In the > case of reading or writing files the utilization boosts always to 100% > for a long time. Very ugly examples are "Firefox starting" or "zypper > updates". > That is snapshot of the output of iostat: > > > Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s > avgrq-sz avgqu-sz await svctm %util > sda 0,00 0,00 0,00 7,33 0,00 43,33 > 5,91 0,33 43,18 33,32 24,43 > sdb 0,00 0,00 0,00 7,33 0,00 43,33 > 5,91 0,35 45,59 39,73 29,13 > md0 0,00 0,00 0,00 0,67 0,00 5,33 > 8,00 0,00 0,00 0,00 0,00 > md1 0,00 0,00 0,00 0,33 0,00 5,33 > 16,00 0,00 0,00 0,00 0,00 > md2 0,00 0,00 0,00 0,33 0,00 1,00 > 3,00 0,00 0,00 0,00 0,00 > md3 0,00 0,00 0,00 0,00 0,00 0,00 > 0,00 0,00 0,00 0,00 0,00 > md4 0,00 0,00 0,00 0,00 0,00 0,00 > 0,00 0,00 0,00 0,00 0,00 > md5 0,00 0,00 0,00 0,33 0,00 0,67 > 2,00 0,00 0,00 0,00 0,00 > > I checked with mdadm if a resync happens or so, but this is not the > case. The state says "active" on all RAID devices - btw. what is the > difference to "clean" ? > > thanks for any hints, > harald > -- > To unsubscribe from this list: send the line "unsubscribe linux-raid" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- Roberto Spadim Spadim Technology / SPAEmpresarial -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
