On 7/27/2011 5:26 AM, John Robinson wrote: > On 27/07/2011 11:22, Stan Hoeppner wrote: >> On 7/27/2011 12:42 AM, Simon Matthews wrote: >>> On Sun, Jul 17, 2011 at 5:11 AM, John Robinson >>> <john.robinson@xxxxxxxxxxxxxxxx> wrote: >>> >>>> Pretty poor. CentOS 5, Intel ICH10, md RAID 6 over 5 7200rpm 1TB >>>> drives, >>>> then LVM, then ext3: >>>> # dd if=/dev/zero of=test bs=4096 count=262144 >>>> 262144+0 records in >>>> 262144+0 records out >>>> 1073741824 bytes (1.1 GB) copied, 2.5253 seconds, 425 MB/s >>> >>> What hard drive offers a sustained data rate of 425 MB/s or even half >>> that? >> >> 425 MB/s / 3 spindles = 142 MB/s per spindle >> >> That's not poor, it's excellent. Which drives are these? WD Black, >> Seagate, Hitachi? > > Gentlemen, we've been round this loop before about 10 days ago. Pol's 20 > MB/s was poor because he was testing on an array with unaligned > partitions and a resync was running, my 425 MB/s was a bad test because > it didn't use fdatasync or direct and I said dd was a bad test anyway, > etc etc. Of course the 425 number is higher than real world. But this is the dd "test" method for which many post results, so the number is still somewhat valid for very coarse comparison purposes among systems. A 10GB run would have been better than 1GB obviously. The Linpack benchmark is very similar to dd in this regard. It's a horrible measure of supercomputer performance, but it's what everyone uses. It's what allows US Government labs to go to Congress with and say "The Chinese have passed us in the Supercomputer race. We need more money to take the lead". (And, stupidly, Congress gives them the money) -- Stan -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
