As no personality understand bad block lists yet, we must
reject any device that is known to contain bad blocks.
As the personalities get taught, these tests can be removed.
This only applies to raid1/raid5/raid10.
For linear/raid0/multipath/faulty the whole concept of bad blocks
doesn't mean anything so there is no point adding the checks.
Signed-off-by: NeilBrown <neilb@xxxxxxx>
---
drivers/md/raid1.c | 7 +++++++
drivers/md/raid10.c | 8 ++++++++
drivers/md/raid5.c | 7 +++++++
3 files changed, 22 insertions(+), 0 deletions(-)
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 3cbf0ac..8db311d 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1055,6 +1055,9 @@ static int raid1_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
if (mddev->recovery_disabled == conf->recovery_disabled)
return -EBUSY;
+ if (rdev->badblocks.count)
+ return -EINVAL;
+
if (rdev->raid_disk >= 0)
first = last = rdev->raid_disk;
@@ -1994,6 +1997,10 @@ static int run(mddev_t *mddev)
blk_queue_segment_boundary(mddev->queue,
PAGE_CACHE_SIZE - 1);
}
+ if (rdev->badblocks.count) {
+ printk(KERN_ERR "md/raid1: Cannot handle bad blocks yet\n");
+ return -EINVAL;
+ }
}
mddev->degraded = 0;
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 5def27c..8aadd2f 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1101,6 +1101,9 @@ static int raid10_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
int first = 0;
int last = conf->raid_disks - 1;
+ if (rdev->badblocks.count)
+ return -EINVAL;
+
if (mddev->recovery_cp < MaxSector)
/* only hot-add to in-sync arrays, as recovery is
* very different from resync
@@ -2263,6 +2266,11 @@ static int run(mddev_t *mddev)
(conf->raid_disks / conf->near_copies));
list_for_each_entry(rdev, &mddev->disks, same_set) {
+
+ if (rdev->badblocks.count) {
+ printk(KERN_ERR "md/raid10: cannot handle bad blocks yet\n");
+ goto out_free_conf;
+ }
disk_idx = rdev->raid_disk;
if (disk_idx >= conf->raid_disks
|| disk_idx < 0)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 6337768..db5d703 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -4667,6 +4667,10 @@ static int run(mddev_t *mddev)
* 0 for a fully functional array, 1 or 2 for a degraded array.
*/
list_for_each_entry(rdev, &mddev->disks, same_set) {
+ if (rdev->badblocks.count) {
+ printk(KERN_ERR "md/raid5: cannot handle bad blocks yet\n");
+ goto abort;
+ }
if (rdev->raid_disk < 0)
continue;
if (test_bit(In_sync, &rdev->flags)) {
@@ -4975,6 +4979,9 @@ static int raid5_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
int first = 0;
int last = conf->raid_disks - 1;
+ if (rdev->badblocks.count)
+ return -EINVAL;
+
if (has_failed(conf))
/* no point adding a device */
return -EINVAL;
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
