Re: How to track down abysmal performance ata - raid1 - crypto - vg/lv - xfs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Aug 04, 2010 at 07:18:03AM -0400, Christoph Hellwig wrote:
> On Wed, Aug 04, 2010 at 12:25:26PM +0200, Dominik Brodowski wrote:
> > Hey,
> > 
> > many thanks for your feedback. It seems the crypto step is the culprit:
> > 
> > Reading 1.1 GB with dd, iflag=direct, bs=8k:
> > 
> > /dev/sd*                35.3 MB/s       ( 90 %)
> > /dev/md*                39.1 MB/s       (100 %)
> > /dev/mapper/md*_crypt    3.9 MB/s       ( 10 %)
> > /dev/mapper/vg1-*        3.9 MB/s       ( 10 %)
> > 
> > The "good" news: it also happens on my notebook, even though it has a
> > different setup (no raid, disk -> lv/vg -> crypt). On my notebook, I'm
> > more than happy to test out different kernel versions, patches etc.
> > 
> > /dev/sd*                17.7 MB/s       (100 %)
> > /dev/mapper/vg1-*       16.2 MB/s       ( 92 %)
> > /dev/mapper/*_crypt      3.1 MB/s       ( 18 %)
> 
> The good news is that you have it tracked down, the bad news is that
> I know very little about dm-crypt.  Maybe the issue is the single
> threaded decryption in dm-crypt?  Can you check how much CPU time
> the dm crypt kernel thread uses?

2 CPUs overall:
Cpu(s):  1.0%us,  5.7%sy,  0.0%ni, 44.8%id, 47.0%wa,  0.0%hi,  1.5%si, 0.0%st

Thanks & best,
	Dominik
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux