Re: mdadm --add Device or resource busy error and multiple drives "failing" on RAID 6 at once

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 16/07/2010 12:54, fibreraid@xxxxxxxxx wrote:
I am using Ubuntu Jaunty (9.04) 64-bit with mdadm 2.6.9 on a whitebox
server with 8GB RAM and dual Xeon quad-core CPUs. I have a RAID 6
consisting of 12 drives all located in the same enclosure, using the
1.2 superblock. For some reason, mdadm seems to "kick out" numerous
drives out of the array at once (sometimes 5 or more). This results in
a degraded state. I've tried replacing the cabling, SAS controller to
which the drives are connected, and even updating the drive firmware
but mdadm still seems to do this on occasion (like once a week). I am
highly doubting all these drives are failing at once. Any further
ideas on what might be causing this issue?

I recognise these symptoms from earlier postings, relating to problems with the driver for a controller card/chip (I forget which one) and S.M.A.R.T. - you might grep the list archives for references to your controller.

Cheers,

John.
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux