2010.07.08. 0:50 keltezéssel, Neil Brown írta: > Then after you create the raid0, use the same command > mdadm -E /dev/sdc6 > to check the Data Offset again and make sure it is the same. > I suspect it will be, so everything will be fine. > However if it isn't don't try to access the array. Post the details and I'll > figure out what to do next. > It doesn't work, and the data offsets are different (in the mean time i figured out that i made a mistake, and not sdc6 but sdb6 is the other correct device): Old: sdb6: 592 sectors sdd6: 264 sectors New: sdb6: 2048 sectors sdd6: 2048 sectors if i modify the source code of the mdadm, but don't know how to make it to set differently based on the partition.. thanks in advance! Csaba -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
