On Sun, Mar 28, 2010 at 7:32 PM, Joachim Otahal <Jou@xxxxxxx> wrote: > Joachim Otahal schrieb: >> >> free says: swap active, mdstat says: >> md2 : active (auto-read-only) raid1 sda2[1] sdb2[0] >> 979840 blocks [2/2] [UU] > > minor correction: the output right after creating the raid + issuing a > mkswap is > md2 : active raid1 sda2[1] sdb2[0] > 979840 blocks [2/2] [UU] > [=======>.............] resync = 37.9% (372480/979840) finish=0.1min > speed=93120K/sec > > and a few second later: > md2 : active raid1 sda2[1] sdb2[0] > 979840 blocks [2/2] [UU] > > mdadm.conf updated, but md2 still not there after reboot. > > Joachim > > -- > To unsubscribe from this list: send the line "unsubscribe linux-raid" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > Trigger the regeneration of your initrd/initramfs image. It's probably got an mdadm.conf that lacks your second device. -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
