Re: Use of WD20EARS with MDADM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Mar 26, 2010 at 2:06 PM, Mark Knecht <markknecht@xxxxxxxxx> wrote:
> On Fri, Mar 26, 2010 at 2:01 PM, Peter Kieser <peter@xxxxxxxxx> wrote:
>> On 3/26/2010 1:59 PM, Mark Knecht wrote:
>>>
>>> On Fri, Mar 26, 2010 at 1:27 PM, Peter Kieser<peter@xxxxxxxxx>  wrote:
>>> <SNIP>
>>>
>>>>
>>>> <SNIP>
>>>>
>>>
>>> This seems to be a windows program? I don't see a Linux version in
>>> Gentoo portage.
>>>
>>> I could run Windows once to set it if the settings are then
>>> maintained, or do you have a Linux solution?
>>>
>>> - Mark
>>>
>>
>> It's a proprietary DOS application written by WDC that changes the settings
>> on the hard drives firmware. The changes are permanent. You can boot off a
>> USB key or floppy with DOS on it to run the application.
>>
>> -Peter
>
> OK, so possibly FreeDOS will work?
>
> Thanks,
> Mark
>
Here's some data from a WD10EARS. How do I read the LCC_COUNT?


SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE
UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail
Always       -       0
  3 Spin_Up_Time            0x0027   129   128   021    Pre-fail
Always       -       6525
  4 Start_Stop_Count        0x0032   100   100   000    Old_age
Always       -       19
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail
Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age
Always       -       0
  9 Power_On_Hours          0x0032   099   099   000    Old_age
Always       -       1053
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age
Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age
Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age
Always       -       18
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age
Always       -       5
193 Load_Cycle_Count        0x0032   191   191   000    Old_age
Always       -       27557
194 Temperature_Celsius     0x0022   121   116   000    Old_age
Always       -       26
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age
Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age
Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age
Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age
Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age
Offline      -       0


Is it currently at 191 with a fail level of 27557?

This drive is in a desktop machine  - non-RAID - that's pretty much
always turned on and is maybe 4-6 weeks old at this point.

Thanks,
Mark
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux