Re: [SOLVED] RAID-10 array won't auto-assemble @ boot of a Xen Guest; Works just fine 'manually' ... Any ideas?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> A check of the manual page shows that on openSUSE, the command would be:
>    chkconfig --list --allservices | grep -i boot
>
> Boot services are hidden by default, so you need the --allservices (or
> -A) switch to show them.

Learned something new, thanks.

"Something" auto-enabled those services -- particularly boot.md -- on
the box on which "/" & "/boot" were installed to RAID.  I'm gonna
guess the installation process itself took care of that.

I've yet to find/notice an opensuse doc that says I need to manually
enable that -- with 20-20 hindsight, makes sense.

All working now, and procedure noted.

Thanks.

BenDJ
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux