Re: recommended 4port SATA controller ?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 17, 2009 at 4:02 PM, Thomas Fjellstrom <tfjellstrom@xxxxxxx> wrote:
> On Thu September 17 2009, John Bridges wrote:
>> I'm a fan of the SuperMicro AOC-SAT2-MV8, great card.
>> http://www.supermicro.com/products/accessories/addon/AOC-SAT2-MV8.cfm
>>
>> It's an 8 port PCI-X card, works in both PCI and PCI-X slots.
>>
>> SATA2
>>
>> Drivers for Linux are stable, built in.
>>
>
> Have you had any experience with the AOC-SASLP-MV8? I've got one and have been
> having no end of issues with it under linux.
>

I currently use it on a OpenSUSE 11.1 26.27.29-0.1 Kernel.

With OpenSUSE 10.3, sometimes not all drives would be detected at
first power-up because they all took so long to spin up one at a time.
But when I rebooted all drives were seen. Otherwise no major issues
under OpenSUSE 10.3.

Have not had those issues with OpenSUSE 11.1, works perfectly.

Have tested with a variety of 400GB, 750GB, 1TB and 1.5TB drives.

This is with a PCI-X supporting motherboard.

My only experience with the board in a PCI slot is with Win2003
Server, no issues.
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux