2009/8/31 Zdenek Kaspar <zkaspar82@xxxxxxxxx>: > Do you have some sort of port multiplier [because it looks like there > are 2 devices on ata2 -> ata2.00 (sdc),ata2.01 (sdd?)] and can you > provide smartctl -a /dev/sdc output ? This is the output of smartctl -a /dev/sdc: http://nopaste.com/p/aXwmnSEphb This is the output of smartctl -a /dev/sdd: http://nopaste.com/p/aYzhpzppv There isn't any port replicator on this little server (is not a critical or production server). It has 4 SATA Port on the Mainboard: # lspci -v 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: Hewlett-Packard Company Unknown device 3206 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 233 I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at 3080 [size=16] Memory at 88000000 (32-bit, non-prefetchable) [size=1K] Capabilities: [70] Power Management version 2 Thanks, Andrea -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
