Re: Question on RAID-5 using ADMA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jul 8, 2009 at 2:37 PM, Tirumala Reddy Marri<tmarri@xxxxxxxx> wrote:
> Hi,
>  I am having issue with following sequence of steps.
>
> 1. Start raid-5  " mdadm -C /dev/md0 -f -z30000000 -c64 -l5 -n3
> /dev/sd[a-c] -assume -clean"
> 2. mkfs.ext3 /dev/md0
> 3. mount /dev/md0 /mnt/tmpmnt
> 4. mdadm -a /dev/md0 /dev/sdd (adding a spare disk)
> 5. mdadm -f /dev/smd0 /dev/sda (fail disk /dev/sda)
>
> When I do ls -l /mnt/tmpmnt I am seeing the errors end of the email.
>

Have you confirmed that your driver can run the xor tests from the
dmatest module without issue?
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux