I was trying to use mdadm --wait a bit ago to wait for a recovery
operation, but mdadm --wait didn't actually wait.
Here is md12 after adding /dev/sdf1 back to it.
md12 : active raid1 sdf1[3] nbd0[2](W)(F) sde[0]
72612988 blocks super 1.1 [3/1] [U__]
[>....................] recovery = 3.0% (2195456/72612988)
finish=51.4min speed=22805K/sec
bitmap: 139/139 pages [556KB], 256KB chunk
However, mdadm /dev/md12 --wait (and --wait-clean) did not wait for
the recovery to be complete.
turnip:~ # mdadm /dev/md12 --wait
turnip:~ # echo $?
0
turnip:~ # mdadm --version
mdadm - v3.0 - 2nd June 2009
I would --fail and --remove /dev/sdf1 and try again (with --add), and
I did this several times, and I could not get it to wait until the
recovery was complete.
Am I doing something wrong? Did I mis-read the documentation?
kernel: 2.6.27.23, x86_64, openSUSE 11.1 "default" kernel.
mdadm version compiled out of latest git.
--
Jon
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
