rebuilding raided root partition

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Folks,

I've been busily recovering from a bad crash (strangely enough, a single disk drive failure that brought down an entire raided environment, with spares).

I've pretty much recovered and rebuilt everything, EXCEPT....

my root partition is raided, and is now running only on its single spare drive:

-----
server1:~# more /proc/mdstat md2 : inactive sdd3[0] sdb3[2]
    195318016 blocks

server1:~# mdadm --detail /dev/md2  [details omitted]
/dev/md2:
   Raid Level : raid1
  Device Size : 97659008 (93.13 GiB 100.00 GB)
 Raid Devices : 2
Total Devices : 2
Preferred Minor : 2
  Persistence : Superblock is persistent

       State : active, degraded
Active Devices : 0
Working Devices : 2
Failed Devices : 0
Spare Devices : 2

  Number   Major   Minor   RaidDevice State
     0       8       51        0      spare rebuilding   /dev/sdd3
     1       0        0        -      removed

     2       8       19        -      spare   /dev/sdb3
------

note the line "spare rebuilding" - that's the result of: mdadm --add /dev/md2 /dev/sdd3 unfortunately, it doesn't seem to really be doing anything - it's been saying "rebuilding" for several hours

now for another mirror device, doing an mdadm --add, kicked off a resync (as indicated by cat /proc/mdstat) that concluded just fine with a rebuilt mirror array

but for this array, it just shows "active, degraged, and rebuilding" in mdadm --detail, and "inactive" in /proc/mdstat

about the only difference I can see, is that the array that rebuilt started with one primary drive, to which I added a 2nd drive, and then a spare; the one that's hanging is running on a spare, and it thinks I'm adding another spare (note: both serve as physical volumes underlying LVM)

so..... on to questions:

1. What's going on?

2. Any suggestions on how to reassemble the array? mdadm --assemble /dev/md2 tells me I need to deactivate the device, but then, it's my / volume - which leaves me a little stumped

Thanks very much,

Miles Fidelman





--
In theory, there is no difference between theory and practice.
In practice, there is.   .... Yogi Berra




--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux