One quick question about those rules. The 65-mdadm rule looks like it
checks ACTIVE arrays for filesystems, and the 85 rule assembles arrays.
Shouldn't they run in the other order?
distro: Ubuntu 7.10
Two files show up...
85-mdadm.rules:
# This file causes block devices with Linux RAID (mdadm) signatures to
# automatically cause mdadm to be run.
# See udev(8) for syntax
SUBSYSTEM=="block", ACTION=="add|change", ENV{ID_FS_TYPE}=="linux_raid*", \
RUN+="watershed /sbin/mdadm --assemble --scan --no-degraded"
65-mdadm.vol_id.rules:
# This file causes Linux RAID (mdadm) block devices to be checked for
# further filesystems if the array is active.
# See udev(8) for syntax
SUBSYSTEM!="block", GOTO="mdadm_end"
KERNEL!="md[0-9]*", GOTO="mdadm_end"
ACTION!="add|change", GOTO="mdadm_end"
# Check array status
ATTR{md/array_state}=="|clear|inactive", GOTO="mdadm_end"
# Obtain array information
IMPORT{program}="/sbin/mdadm --detail --export $tempnode"
ENV{MD_NAME}=="?*", SYMLINK+="disk/by-id/md-name-$env{MD_NAME}"
ENV{MD_UUID}=="?*", SYMLINK+="disk/by-id/md-uuid-$env{MD_UUID}"
# by-uuid and by-label symlinks
IMPORT{program}="vol_id --export $tempnode"
OPTIONS="link_priority=-100"
ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", \
SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}"
ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", \
SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}"
I see. So udev is invoking the assemble command as soon as it detects
the devices. So is it possible that the spare is not the last drive to
be detected and mdadm assembles too soon?
Neil Brown wrote:
On Thursday January 10, jed@xxxxxxxxxxxxx wrote:
It looks to me like md inspects and attempts to assemble after each
drive controller is scanned (from dmesg, there appears to be a failed
bind on the first three devices after they are scanned, and then again
when the second controller is scanned). Would the scan order cause a
spare to be swapped in?
This suggests that "mdadm --incremental" is being used to assemble the
arrays. Every time udev finds a new device, it gets added to
whichever array is should be in.
If it is called as "mdadm --incremental --run", then it will get
started as soon as possible, even if it is degraded. With the
"--run", it will wait until all devices are available.
Even with "mdadm --incremental --run", you shouldn't get a resync if
the last device is added before the array is written to.
What distro are you running?
What does
grep -R mdadm /etc/udev
show?
NeilBrown
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
