Hey.
[1.] One line summary of the problem:
raid5 hangs and use 100% cpu
[2.] Full description of the problem/report:
I have used 2.6.18 for 284 days or something until my powersupply died, no
problem what so ever duing that time. After that forced reboot I did these
changes; Put in 2 GB more memory so I have 3 GB instead of 1 GB, two disks in
the raid5 got badblocks so I didnt trust them anymore so I bought new disks
(I managed to save the raid5). I have 6x300 GB in a raid5. Two of them are
now 320 GB so created a small raid1 also. That raid5 is encrypted with
aes-cbc-plain. The raid1 is encrypted with aes-cbc-essiv:sha256.
I compiled linux-2.6.22.3 and started to use that. I used the same .config
as in default FC5, I think i just selected P4 cpu and preemptive kernel type.
After 11 or 12 days the computer froze, I wasnt home when it happend and
couldnt fix it for like 3 days. It was just to reboot it as it wasnt possible
to login remotely or on console. It did respond to ping however.
After reboot it rebuilded the raid5.
Then it happend again after approx the same time, 11 or 12 days. I noticed
that the process md1_raid5 used 100% cpu all the time. After reboot it
rebuilded the raid5.
I compiled linux-2.6.23.
And then... it happend again... After about the same time as before.
md1_raid5 used 100% cpu. I also noticed that I wasnt able to save
anything in my homedir, it froze during save. I could read from it however.
My homedir isnt on raid5 but its encrypted. Its not on any disk that has to
do with raid. This problem didnt happend when I used 2.6.18. Currently I use
2.6.18 as I kinda need the computer stable.
After reboot it rebuilded the raid5.
top looked like this:
- 02:37:32 up 11 days, 2:00, 29 users, load average: 21.06, 17.45, 9.38
Tasks: 284 total, 2 running, 282 sleeping, 0 stopped, 0 zombie
Cpu(s): 2.1%us, 51.2%sy, 0.0%ni, 0.0%id, 46.6%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 3114928k total, 2981720k used, 133208k free, 8244k buffers
Swap: 2096472k total, 252k used, 2096220k free, 1690196k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
2147 root 15 -5 0 0 0 R 100 0.0 80:25.80 md1_raid5
11328 iocc 20 0 536m 374m 28m S 3 12.3 249:32.38 firefox-bin
After some time, just before I rebooted I had this load:
02:48:36 up 11 days, 2:11, 29 users, load average: 86.10, 70.80, 40.07
[3.] Keywords (i.e., modules, networking, kernel):
raid5, possible dm_mod
[4.] Kernel version (from /proc/version):
Not using 2.6.23 now but anyway...
Linux version 2.6.18 (root@xxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.1
20060525 (Red Hat 4.1.1-1)) #1 SMP Sun Sep 24 12:58:16 CEST 2006
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
No oopses, doesnt log anything.
[6.] A small shell script or example program which triggers the
problem (if possible)
-
[7.] Environment
Hmm..
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 7.8G 7.0G 761M 91% / <- unencrypted fs
tmpfs 1.5G 0 1.5G 0% /dev/shm
/dev/mapper/home 24G 23G 1.6G 94% /home <- encrypted fs
/dev/mapper/temp 1.4T 822G 555G 60% /temp <- encrypted fs,raid5
/dev/mapper/jb 18G 17G 1.2G 94% /mnt/jb <- encrypted fs,raid1
[root@flashdance linux-2.6.23]# cryptsetup status home
/dev/mapper/home is active:
cipher: aes-cbc-plain
keysize: 256 bits
device: /dev/sda3
offset: 0 sectors
size: 50861790 sectors
mode: read/write
[root@flashdance linux-2.6.23]# cryptsetup status temp
/dev/mapper/temp is active:
cipher: aes-cbc-plain
keysize: 256 bits
device: /dev/md1
offset: 0 sectors
size: 2930496000 sectors
mode: read/write
[root@flashdance linux-2.6.23]# cryptsetup status jb
/dev/mapper/jb is active:
cipher: aes-cbc-essiv:sha256
keysize: 256 bits
device: /dev/md0
offset: 0 sectors
size: 37238528 sectors
mode: read/write
[7.1.] Software (add the output of the ver_linux script here)
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux flashdance.cx 2.6.18 #1 SMP Sun Sep 24 12:58:16 CEST 2006 i686 i686
i386 GNU/Linux
Gnu C 4.1.1
Gnu make 3.80
binutils 2.16.91.0.6
util-linux 2.13-pre7
mount 2.13-pre7
module-init-tools 3.2.2
e2fsprogs 1.38
reiserfsprogs 3.6.19
quota-tools 3.13.
PPP 2.4.3
Linux C Library 2.4
Dynamic linker (ldd) 2.4
Procps 3.2.7
Net-tools 1.60
Kbd 1.12
oprofile 0.9.1
Sh-utils 5.97
udev 084
wireless-tools 28
Modules Loaded vfat fat usb_storage cdc_ether usbnet cdc_acm nfs
sha256 aes dm_crypt mga_vid iptable_filter ip_tables x_tables nfsd exportfs
lockd nfs_acl ipv6 w83627hf hwmon_vid hwmon eeprom i2c_isa sunrpc raid1
raid456 xor video button battery asus_acpi ac lp parport_pc parport
snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul
snd_emu10k1 snd_rawmidi snd_ac97_codec snd_ac97_bus snd_seq_dummy snd_seq_oss
snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_device
snd_timer snd_page_alloc snd_util_mem floppy ehci_hcd sg uhci_hcd emu10k1_gp
snd_hwdep matrox_w1 snd e1000 gameport wire soundcore serio_raw cn sata_sil
i82875p_edac ata_piix pcspkr i2c_i801 edac_mc dm_snapshot dm_zero dm_mirror
dm_mod ext3 jbd sata_promise libata aic7xxx scsi_transport_spi sd_mod
scsi_mod
(but its with 2.6.23 that it happends, not 2.6.18..)
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 3
model name : Intel(R) Pentium(R) 4 CPU 3.00GHz
stepping : 3
cpu MHz : 2998.726
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe constant_tsc pni
monit
or ds_cpl cid
bogomips : 6001.85
processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 3
model name : Intel(R) Pentium(R) 4 CPU 3.00GHz
stepping : 3
cpu MHz : 2998.726
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe constant_tsc pni
monit
or ds_cpl cid
bogomips : 5997.57
[7.3.] Module information (from /proc/modules):
vfat 17152 0 - Live 0xfae23000
fat 55964 1 vfat, Live 0xfade3000
usb_storage 73280 0 - Live 0xfadd0000
cdc_ether 10624 0 - Live 0xfad61000
usbnet 21768 1 cdc_ether, Live 0xfadc9000
cdc_acm 20256 0 - Live 0xfadf5000
nfs 235500 3 - Live 0xfad8e000
sha256 15616 0 - Live 0xfad81000
aes 32704 4 - Live 0xfad71000
dm_crypt 16136 1 - Live 0xfad66000
mga_vid 18156 0 - Live 0xfad6b000
iptable_filter 7552 0 - Live 0xfaba7000
ip_tables 18116 1 iptable_filter, Live 0xfad7b000
x_tables 18948 1 ip_tables, Live 0xfabb6000
nfsd 221488 17 - Live 0xfad0d000
exportfs 10368 1 nfsd, Live 0xfaba3000
lockd 66568 3 nfs,nfsd, Live 0xfae2c000
nfs_acl 8192 2 nfs,nfsd, Live 0xfaba0000
ipv6 266272 122 - Live 0xfacca000
w83627hf 29968 0 - Live 0xfab97000
hwmon_vid 7168 1 w83627hf, Live 0xfabac000
hwmon 7940 1 w83627hf, Live 0xfab52000
eeprom 11664 0 - Live 0xfabb2000
i2c_isa 9856 1 w83627hf, Live 0xfab69000
sunrpc 158908 13 nfs,nfsd,lockd,nfs_acl, Live 0xfaeba000
raid1 27392 1 - Live 0xfab61000
raid456 121360 1 - Live 0xfab78000
xor 19848 1 raid456, Live 0xfab4c000
video 21252 0 - Live 0xfab45000
button 11408 0 - Live 0xfab41000
battery 14852 0 - Live 0xfab3c000
asus_acpi 21016 0 - Live 0xfab35000
ac 9860 0 - Live 0xfab55000
lp 17352 0 - Live 0xfab5b000
parport_pc 31524 1 - Live 0xfab6f000
parport 41160 2 lp,parport_pc, Live 0xfabbd000
snd_emu10k1_synth 12032 0 - Live 0xfaa86000
snd_emux_synth 39552 1 snd_emu10k1_synth, Live 0xfaab2000
snd_seq_virmidi 12032 1 snd_emux_synth, Live 0xfaa82000
snd_seq_midi_emul 10752 1 snd_emux_synth, Live 0xfa94c000
snd_emu10k1 122016 3 snd_emu10k1_synth, Live 0xfaa25000
snd_rawmidi 29056 2 snd_seq_virmidi,snd_emu10k1, Live 0xfaa58000
snd_ac97_codec 95776 1 snd_emu10k1, Live 0xfaa0c000
snd_ac97_bus 6912 1 snd_ac97_codec, Live 0xfa9fd000
snd_seq_dummy 8452 0 - Live 0xfa9f9000
snd_seq_oss 37504 0 - Live 0xfa9ee000
snd_seq_midi_event 12160 2 snd_seq_virmidi,snd_seq_oss, Live 0xfaa08000
snd_seq 57456 8
snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,s
nd_seq_oss,snd_seq_midi_event, Live 0xfa9de000
snd_pcm_oss 46848 1 - Live 0xfa9d1000
snd_mixer_oss 20992 1 snd_pcm_oss, Live 0xfa9c3000
snd_pcm 80772 3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss, Live 0xfaa8c000
snd_seq_device 12940 7
snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_rawmidi,
snd_seq_dummy,snd_seq_oss,snd_seq, Live 0xfa9be000
snd_timer 27524 3 snd_emu10k1,snd_seq,snd_pcm, Live 0xfa9b6000
snd_page_alloc 14728 2 snd_emu10k1,snd_pcm, Live 0xfa9a7000
snd_util_mem 9344 2 snd_emux_synth,snd_emu10k1, Live 0xfa9cd000
floppy 61732 0 - Live 0xfa996000
ehci_hcd 35336 0 - Live 0xfa98a000
sg 38812 0 - Live 0xfa97b000
uhci_hcd 27916 0 - Live 0xfa971000
emu10k1_gp 8448 0 - Live 0xfa96b000
snd_hwdep 13956 2 snd_emux_synth,snd_emu10k1, Live 0xfa966000
matrox_w1 8704 0 - Live 0xfa986000
snd 57476 15
snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_rawmidi,snd_ac97_cod
ec,snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_device,snd_time
r,snd_hwdep, Live 0xfa956000
e1000 120768 0 - Live 0xfa92d000
gameport 20360 2 emu10k1_gp, Live 0xfa950000
wire 28676 1 matrox_w1, Live 0xfa9ad000
soundcore 14432 2 snd, Live 0xfa906000
serio_raw 11652 0 - Live 0xfa902000
cn 13344 1 wire, Live 0xfa8fd000
sata_sil 16392 4 - Live 0xfa8f5000
i82875p_edac 11012 0 - Live 0xf885b000
ata_piix 18440 4 - Live 0xfa8ef000
pcspkr 7680 0 - Live 0xf8825000
i2c_i801 12300 0 - Live 0xfa8ea000
edac_mc 27400 1 i82875p_edac, Live 0xf884a000
dm_snapshot 21036 0 - Live 0xfa8e3000
dm_zero 6272 0 - Live 0xf8828000
dm_mirror 25808 0 - Live 0xf8853000
dm_mod 61208 10 dm_crypt,dm_snapshot,dm_zero,dm_mirror, Live 0xf8870000
ext3 134792 4 - Live 0xfa90b000
jbd 62504 1 ext3, Live 0xf885f000
sata_promise 16260 0 - Live 0xf882b000
libata 102292 3 sata_sil,ata_piix,sata_promise, Live 0xfa8c9000
aic7xxx 143540 3 - Live 0xfa8a4000
scsi_transport_spi 28928 1 aic7xxx, Live 0xf8841000
sd_mod 24832 18 - Live 0xf8839000
scsi_mod 138152 6 usb_storage,sg,libata,aic7xxx,scsi_transport_spi,sd_mod,
Live
0xfa881000
00000000-0009fbff : System RAM
00000000-00000000 : Crash kernel
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000cc7ff : Adapter ROM
000cc800-000d27ff : Adapter ROM
000f0000-000fffff : System ROM
00100000-bff2ffff : System RAM
00100000-00324b2d : Kernel code
00324b2e-004658ab : Kernel data
bff30000-bff3ffff : ACPI Tables
bff40000-bffeffff : ACPI Non-volatile Storage
bfff0000-bfffffff : reserved
c4000000-c40fffff : PCI Bus #03
c4000000-c407ffff : 0000:03:0b.0
c4080000-c408ffff : 0000:03:0c.0
c4100000-c41003ff : 0000:00:1f.1
f2a00000-f69fffff : PCI Bus #01
f4000000-f5ffffff : 0000:01:00.0
f4000000-f5ffffff : matroxfb FB
f8000000-f9ffffff : 0000:00:00.0
fab00000-fbbfffff : PCI Bus #01
fb000000-fb7fffff : 0000:01:00.0
fbbe0000-fbbeffff : 0000:01:00.0
fbbfc000-fbbfffff : 0000:01:00.0
fbbfc000-fbbfffff : matroxfb MMIO
fbc00000-fbcfffff : PCI Bus #02
fbce0000-fbcfffff : 0000:02:01.0
fbce0000-fbcfffff : e1000
fbd00000-fbefffff : PCI Bus #03
fbefe000-fbefefff : 0000:03:0c.0
fbefe000-fbefefff : aic7xxx
fbeff400-fbeff7ff : 0000:03:0b.0
fbeff400-fbeff7ff : sata_sil
fbfff800-fbfffbff : 0000:00:1d.7
fbfff800-fbfffbff : ehci_hcd
fecf0000-fecf0fff : 0000:00:06.0
ffb80000-ffffffff : reserved
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
0290-0297 : pnp 00:0b
0295-0296 : w83627hf
02f8-02ff : serial
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03c0-03df : matrox
03f2-03f5 : floppy
03f6-03f6 : ide0
03f7-03f7 : floppy DIR
03f8-03ff : serial
0400-041f : 0000:00:1f.3
0400-041f : i801_smbus
0480-04bf : 0000:00:1f.0
0680-06ff : pnp 00:0b
0800-087f : 0000:00:1f.0
0800-0803 : ACPI PM1a_EVT_BLK
0804-0805 : ACPI PM1a_CNT_BLK
0808-080b : ACPI PM_TMR
0828-082f : ACPI GPE0_BLK
0cf8-0cff : PCI conf1
c000-cfff : PCI Bus #02
cf80-cf9f : 0000:02:01.0
cf80-cf9f : e1000
d000-dfff : PCI Bus #03
d800-d8ff : 0000:03:0c.0
df30-df3f : 0000:03:0b.0
df30-df3f : sata_sil
df40-df5f : 0000:03:0a.0
df40-df5f : EMU10K1
df80-df87 : 0000:03:0b.0
df80-df87 : sata_sil
dfa0-dfa3 : 0000:03:0b.0
dfa0-dfa3 : sata_sil
dfa4-dfa7 : 0000:03:0b.0
dfa4-dfa7 : sata_sil
dfa8-dfaf : 0000:03:0b.0
dfa8-dfaf : sata_sil
dfe0-dfe7 : 0000:03:0a.1
dfe0-dfe7 : emu10k1-gp
eec0-eedf : 0000:00:1d.0
eec0-eedf : uhci_hcd
ef00-ef1f : 0000:00:1d.1
ef00-ef1f : uhci_hcd
ef20-ef3f : 0000:00:1d.2
ef20-ef3f : uhci_hcd
ef40-ef5f : 0000:00:1d.3
ef40-ef5f : uhci_hcd
ef90-ef9f : 0000:00:1f.2
ef90-ef9f : libata
efa0-efa7 : 0000:00:1f.2
efa0-efa7 : libata
efa8-efab : 0000:00:1f.2
efa8-efab : libata
efac-efaf : 0000:00:1f.2
efac-efaf : libata
efe0-efe7 : 0000:00:1f.2
efe0-efe7 : libata
fc00-fc0f : 0000:00:1f.1
fc00-fc07 : ide0
fc08-fc0f : ide1
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Intel Corporation 82875P/E7210 Memory Controller Hub
(rev 02)
Subsystem: ASUSTeK Computer Inc. Unknown device 80f6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=32M]
Capabilities: [e4] Vendor Specific Information
Capabilities: [a0] AGP version 3.0
Status: RQ=32 Iso- ArqSz=2 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW-
Rate=x1
00:01.0 PCI bridge: Intel Corporation 82875P Processor to AGP Controller (rev
02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fab00000-fbbfffff
Prefetchable memory behind bridge: f2a00000-f69fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
00:03.0 PCI bridge: Intel Corporation 82875P/E7210 Processor to PCI to CSA
Bridge (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fbc00000-fbcfffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 169
Region 4: I/O ports at eec0 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 217
Region 4: I/O ports at ef00 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 177
Region 4: I/O ports at ef20 [size=32]
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 169
Region 4: I/O ports at ef40 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI
Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 201
Region 0: Memory at fbfff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbd00000-fbefffff
Prefetchable memory behind bridge: c4000000-c40fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface
Bridge (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE
Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 177
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at fc00 [size=16]
Region 5: Memory at c4100000 (32-bit, non-prefetchable) [size=1K]
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev
02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. P4P800 SE Mainboard
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 177
Region 0: I/O ports at efe0 [size=8]
Region 1: I/O ports at efac [size=4]
Region 2: I/O ports at efa0 [size=8]
Region 3: I/O ports at efa8 [size=4]
Region 4: I/O ports at ef90 [size=16]
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller
(rev 02)
Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 193
Region 4: I/O ports at 0400 [size=32]
01:00.0 VGA compatible controller: Matrox Graphics, Inc. G400/G450 (rev 03)
(prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc. Millennium G400 MAX/Dual Head 32Mb
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (4000ns min, 8000ns max), Cache Line Size 04
Interrupt: pin A routed to IRQ 169
Region 0: Memory at f4000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at fbbfc000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at fb000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at fbbe0000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [f0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2
Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW-
Rate=x1
02:01.0 Ethernet controller: Intel Corporation 82547EI Gigabit Ethernet
Controller (LOM)
Subsystem: ASUSTeK Computer Inc. Unknown device 80f7
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (63750ns min), Cache Line Size 04
Interrupt: pin A routed to IRQ 177
Region 0: Memory at fbce0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at cf80 [size=32]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
03:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a)
Subsystem: Creative Labs SBLive! 5.1 Digital Model SB0220
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 209
Region 0: I/O ports at df40 [size=32]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:0a.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev
0a)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 0: I/O ports at dfe0 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:0b.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid]
Serial ATA Controller (rev 02)
Subsystem: Silicon Image, Inc. SiI 3114 SATARaid Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size 04
Interrupt: pin A routed to IRQ 201
Region 0: I/O ports at dfa8 [size=8]
Region 1: I/O ports at dfa4 [size=4]
Region 2: I/O ports at df80 [size=8]
Region 3: I/O ports at dfa0 [size=4]
Region 4: I/O ports at df30 [size=16]
Region 5: Memory at fbeff400 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at c4000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
03:0c.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 2000ns max), Cache Line Size 04
Interrupt: pin A routed to IRQ 185
Region 0: I/O ports at d800 [disabled] [size=256]
Region 1: Memory at fbefe000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at c4080000 [disabled] [size=64K]
[7.6.] SCSI information (from /proc/scsi/scsi)
Attached devices:
Host: scsi0 Channel: 00 Id: 10 Lun: 00
Vendor: MAXTOR Model: ATLAS10K4_36WLS Rev: DFL0
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: SAMSUNG HD321KJ Rev: CP10
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: SAMSUNG HD321KJ Rev: CP10
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi3 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Maxtor 6V300F0 Rev: VA11
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi4 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Maxtor 6V300F0 Rev: VA11
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi5 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Maxtor 6V300F0 Rev: VA11
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi6 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Maxtor 6V300F0 Rev: VA11
Type: Direct-Access ANSI SCSI revision: 05
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
$ cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4] [raid1]
md1 : active raid5 sdg1[1] sdf1[0] sde1[2] sdd1[3] sdc1[5] sdb1[4]
1465248000 blocks level 5, 256k chunk, algorithm 2 [6/6] [UUUUUU]
md0 : active raid1 sdc2[1] sdb2[0]
18619264 blocks [2/2] [UU]
[X.] Other notes, patches, fixes, workarounds:
crypto could be related to this problem, but Im not sure.
If it helps I can boot 2.6.23 to get the correct /proc/version and
stuff like that. Has anyone else reported a problem like this?
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
