Re: flaky controller or disk error?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On Mon, 22 Oct 2007, Louis-David Mitterrand wrote:

Hi,

[using kernel 2.6.23 and mdadm 2.6.3+20070929]

I have a rather flaky sata controller with which I am trying to resync a raid5
array. It usually starts failing after 40% of the resync is done. Short of
changing the controller (which I will do later this week), is there a way to
have mdmadm resume the resync where it left at reboot time?

Here is the error I am seeing in the syslog. Can this actually be a disk
error?

	Oct 18 11:54:34 sylla kernel: ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0x2 frozen
	Oct 18 11:54:34 sylla kernel: ata1.00: irq_stat 0x00400000, PHY RDY changed
	Oct 18 11:54:34 sylla kernel: ata1.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
	Oct 18 11:54:34 sylla kernel: res 40/00:00:19:26:33/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
	Oct 18 11:54:35 sylla kernel: ata1: soft resetting port
	Oct 18 11:54:40 sylla kernel: ata1: failed to reset engine (errno=-95)<4>ata1: port is slow to respond, please be patient (Status 0xd0)
	Oct 18 11:54:45 sylla kernel: ata1: softreset failed (device not ready)
	Oct 18 11:54:45 sylla kernel: ata1: hard resetting port
	Oct 18 11:54:46 sylla kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
	Oct 18 11:54:46 sylla kernel: ata1.00: configured for UDMA/133
	Oct 18 11:54:46 sylla kernel: ata1: EH complete
	Oct 18 11:54:46 sylla kernel: sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
	Oct 18 11:54:46 sylla kernel: sd 0:0:0:0: [sda] Write Protect is off
	Oct 18 11:54:46 sylla kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
	Oct 18 11:54:46 sylla kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA


Thanks,
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


I've seen something similiar, it turned out to be a bad disk.

I've also seen it when the cable was loose.

Justin.
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux