Re: RAID6 recover problem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Am 12.10.2007 um 17:51 schrieb Nagilum:

Then you can mark them as bad and linux will sync to a spare.

Because it is already running without redundancy - two disks marked as failed - it will simply go offline.

As for your sdc, I'd test it outside of the raid (dd if=/dev/sdc of=/dev/null) to see if this is a real defect or 'just' a checksum error. Then you might also try the fridge (if it's a real defect) or just ignore the error.

I assume it simply is a checksum error.

I think there is a special "dd" version which will not abort on a read error. With that you could also clone that drive (except the failing sectors ofcourse).

I will try to clone this disk and see what happens.

Thanks for the hint
Ralf
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux