On Sun, 27 May 2007, tj wrote:
Thomas Jager wrote:
Hi list.
I run a file server on MD raid-5.
If a client reads one big file and at the same time another client tries to
write a file, the thread writing just sits in uninterruptible sleep until
the reader has finished. Only very small amount of writes get trough while
the reader is still working.
I'm having some trouble pinpointing the problem.
It's not consistent either sometimes it works as expected both the reader
and writer gets some transactions. On huge reads I've seen the writer
blocked for 30-40 minutes without any significant writes happening (Maybe a
few megabytes, of several gigs waiting). It happens with NFS, SMB and FTP,
and local with dd. And seems to be connected to raid-5. This does not
happen on block devices without raid-5. I'm also wondering if it can have
anything to do with loop-aes? I use loop-aes on top of the md, but then
again i have not observed this problem on loop-devices with disk backend. I
do know that loop-aes degrades performance but i didn't think it would do
something like this?
I've seen this problem in 2.6.16-2.6.21
All disks in the array is connected to a controller with a SiI 3114 chip.
I just noticed something else. A couple of slow readers where running on my
raid-5 array. Then i started a copy from another local disk to the array.
Then i got the extremely long wait. I noticed something in iostat:
avg-cpu: %user %nice %system %iowait %steal %idle
3.90 0.00 48.05 31.93 0.00 16.12
Device: tps kB_read/s kB_wrtn/s kB_read kB_wrtn
....
sdg 0.80 25.55 0.00 128 0
sdh 154.89 632.34 0.00 3168 0
sdi 0.20 12.77 0.00 64 0
sdj 0.40 25.55 0.00 128 0
sdk 0.40 25.55 0.00 128 0
sdl 0.80 25.55 0.00 128 0
sdm 0.80 25.55 0.00 128 0
sdn 0.60 23.95 0.00 120 0
md0 199.20 796.81 0.00 3992 0
All disks are member of the same raid array (md0). One of the disks has a ton
of transactions compared to the other disks. Read operations as far as i can
tell. Why? May be connected with my problem?
If you are using ext2/3 check if when creating the filesystem the stride
option helps you, see: http://tldp.org/HOWTO/Software-RAID-HOWTO-5.html#ss5.11
There is a newer howto or wiki but I forgot its location.
Holger
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
