Re: raid5 software vs hardware: parity calculations?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Bill Davidsen wrote:
>
> There have been several recent threads on the list regarding software
> RAID-5 performance. The reference might be updated to reflect the poor
> write performance of RAID-5 until/unless significant tuning is done.
> Read that as tuning obscure parameters and throwing a lot of memory into
> stripe cache. The reasons for hardware RAID should include "performance
> of RAID-5 writes is usually much better than software RAID-5 with
> default tuning.

Could you point me at a source of documentation describing how to
perform such tuning?

Specifically, I have 8x500GB WD STAT drives on a Supermicro PCI-X 8-port
SATA card configured as a single RAID6 array (~3TB available space)

Thanks,

R.

-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux