Hi -
I recently upgraded to the 2.6.17-2-686 SMP kernel image (debian).
Now, when I hot-add a disk (mdadm /dev/md1 --add /dev/hdc3) the array
resyncs to 100%, a bunch of errors appear and then the array resync
starts from 0% again.
mdadm --zero-superblock on the "new" disk doesn't help.
Any suggestions on what might be happening or how to debug/fix would
be welcome.
Thanks -
Leni
$ dmesg # output truncated
...
md: md1: sync done.
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=390716106,
high=23, low=4840138, sector=390716042
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 390716042
...
raid1: hda: unrecoverable I/O read error for block 388499072
RAID1 conf printout:
--- wd:1 rd:3
disk 0, wo:1, o:1, dev:hdc3
disk 2, wo:0, o:1, dev:hda3
RAID1 conf printout:
--- wd:1 rd:3
disk 2, wo:0, o:1, dev:hda3
RAID1 conf printout:
--- wd:1 rd:3
disk 0, wo:1, o:1, dev:hdc3
disk 2, wo:0, o:1, dev:hda3
md: syncing RAID array md
...
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
