Re: How mdadm can support > 2T

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wednesday November 15, yu_xianyin@xxxxxxxxxxxxx wrote:

> Ilinux-raid want to create raid0 use mdadm 2.5.6, kernel 2.6.18-iop3
> on the intel iop80331(32bit). use 5 disks, and every hard disk is
> 500G. But it can't beyond > 2T.  How can support >2T on the 32bit
> cpu ?   

Make sure you have 
   CONFIG_LBD=y
in .config.  It works just fine.

NeilBrown
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux