Guy/Neil:
Thanks a lot for the help.
Sorry that I didn't include all of the info in my last message, but this box is off the network right now and doesn't even have a floppy or monitor, so I had to do a little work to get the info out.
I tried to start the array with the 3 good disks and the 1 spare, but I got an error to the effect that 3 good + 1 spare drives are not enough to start the array (see below)
> cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid5] [multipath] read_ahead not set unused devices: <none>
> mdadm -D /dev/md0 mdadm: md device /dev/md0 does not appear to be active
> mdadm --assemble --force /dev/md0 /dev/hde1 /dev/hdi1 /dev/hdm1 /dev/hdo1
mdadm: /dev/md0 assembled from 3 drives and 1 spare - not enough to start the array
> cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid5] [multipath] read_ahead not set md0: inactive ide/host2/bus0/target0/lun0/part1[0] ide/host4/bus0/target0/lun0/part1[5] ide/host6/bus1/target0/lun0/part1[4] ide/host6/bus0/target0/lun0/part1[3]
Some notes: hdk1 is the disk which failed initially hdi1 is the disk which I removed and which thinks it is a 'spare'
The other three drives report basically identical info, like this: > mdadm -E /dev/hde1
Magic : a92b4efc Version : 00.90.00 UUID : ec2e64a8:fffd3e41:ffee5518:2f3e858c Creation Time : Sun Oct 5 01:25:49 2003 Build Level: raid5 Device Size : 160079488 (152.66 GiB 163.92 GB) Raid Devices : 5 Total Devices : 5 Preferred Minor : 0
Update Time Sat Sep 25 22:07:26 2004 State : dirty Active Devices : 3 Working Devices : 4 Failed Devices : 1 Spare Devices : 1 Checksum : 4ee5cc77 - correct Events : 0.10
Layout : left-symmetric Chunk Size : 128K
Number Major Minor RaidDevice State
this 0 22 1 0 active sync
0 0 22 1 0 active sync
1 1 0 0 1 faulty removed
2 2 56 1 2 faulty /dev/ide/host4/bus0/target0/lun0/part1
3 3 57 1 3 active sync /dev/ide/host4/bus1/target0/lun0/part1
4 4 88 1 4 active sync /dev/ide/host6/bus0/target0/lun0/part1
5 5 34 1 5 spare
Here are the two drives in question:
__________mdadm -E /dev/hdi1:
Magic : a92b4efc Version : 00.90.00 UUID : ec2e64a8:fffd3e41:ffee5518:2f3e858c Creation Time : Sun Oct 5 01:25:49 2003 Build Level: raid5 Device Size : 160079488 (152.66 GiB 163.92 GB) Raid Devices : 5 Total Devices : 5 Preferred Minor : 0
Update Time Sat Sep 25 22:07:26 2004 State : dirty Active Devices : 3 Working Devices : 4 Failed Devices : 1 Spare Devices : 1 Checksum : 4ee5cc77 - correct Events : 0.10
Layout : left-symmetric Chunk Size : 128K
Number Major Minor RaidDevice State
this 5 34 1 5 spare
0 0 22 1 0 active sync
1 1 0 0 1 faulty removed
2 2 56 1 2 faulty /dev/ide/host4/bus0/target0/lun0/part1
3 3 57 1 3 active sync /dev/ide/host4/bus1/target0/lun0/part1
4 4 88 1 4 active sync /dev/ide/host6/bus0/target0/lun0/part1
5 5 34 1 5 spare
__________mdadm -E /dev/hdk1 Magic : a92b4efc Version : 00.90.00 UUID : ec2e64a8:fffd3e41:ffee5518:2f3e858c Creation Time : Sun Oct 5 01:25:49 2003 Build Level: raid5 Device Size : 160079488 (152.66 GiB 163.92 GB) Raid Devices : 5 Total Devices : 5 Preferred Minor : 0
Update Time Sat Sep 25 22:07:24 2004 State : dirty Active Devices : 4 Working Devices : 5 Failed Devices : 0 Spare Devices : 1 Checksum : 4ee5cc77 - correct Events : 0.9
Layout : left-symmetric Chunk Size : 128K
Number Major Minor RaidDevice State
this 2 56 1 2 active sync /dev/ide/host4/bus0/target0/lun0/part1
0 0 22 1 0 active sync
1 1 0 0 1 faulty removed
2 2 56 1 2 active sync /dev/ide/host4/bus0/target0/lun0/part1
3 3 57 1 3 active sync /dev/ide/host4/bus1/target0/lun0/part1
4 4 88 1 4 active sync /dev/ide/host6/bus0/target0/lun0/part1
5 5 34 1 5 spare
Neil Brown wrote:
On Friday November 12, bugzilla@xxxxxxxxxxxxxxxx wrote:
First, stop using the old raid tools. Use mdadm only! mdadm would not have
allowed your error to occur.
I'm afraid this isn't correct, though the rest of Guy's advice is very good (thanks Guy!).
mdadm --remove does exactly the same thing as raidhotremove
It is the kernel that should (and does) stop you from hot-removing a device that is working and active. So I'm not quite sure what happened to Robert...
Robert: it is always useful to provide specific with the output of cat /proc/mdstat
and
mdadm -D /dev/mdX
This avoids possible confusion over terminology.
NeilBrown
- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
