I was hoping you would find a bad disk. I don't know what could be wrong. Anyone else have any ideas? Guy -----Original Message----- From: linux-raid-owner@xxxxxxxxxxxxxxx [mailto:linux-raid-owner@xxxxxxxxxxxxxxx] On Behalf Of David Wasylciw Sent: Sunday, October 24, 2004 1:41 PM To: 'Guy'; linux-raid@xxxxxxxxxxxxxxx Subject: RE: Problem with RAID5 + ext3 expansion I ran that test on each drive but all checked out just fine. What should I do now? -----Original Message----- From: linux-raid-owner@xxxxxxxxxxxxxxx [mailto:linux-raid-owner@xxxxxxxxxxxxxxx] On Behalf Of Guy Sent: Saturday October 23, 2004 2:42 AM To: mailinglists-david@xxxxxxxxxxxx; linux-raid@xxxxxxxxxxxxxxx Subject: RE: Problem with RAID5 + ext3 expansion You should test each disk with a command similar to this: dd if=/dev/<disk> of=/dev/null bs=1024k for <disk> use the full disk, not just a partition. This is just a read test. You can test all at the same time if you use different windows (xterms, or whatever). Guy -----Original Message----- From: linux-raid-owner@xxxxxxxxxxxxxxx [mailto:linux-raid-owner@xxxxxxxxxxxxxxx] On Behalf Of David Wasylciw Sent: Saturday, October 23, 2004 1:25 AM To: linux-raid@xxxxxxxxxxxxxxx Subject: Problem with RAID5 + ext3 expansion Alright, so, I'm not sure if this is the right place to come to about this problem but here's a overview of my setup: 6 x 250Gb IDE Hard Drives, generally I use evms and have a RAID5 array built, with a lvm container on top of it and then my volumes. What I had been trying to do was expand one of my ext3 volumes on top of the lvm, I had taken it offline and evms was proceeding with the expansion, but then the server locked up. Now, the reason I think this list might be the right spot is that whenever I boot up it hangs after detecting the arraying and beginning a sync. To troubleshoot I attempted to remove the md0 device and recreate it with mdadm. Upon doing this it hung immediately. Mdadm reported that the array still existed and that it would try to bring it online, at that point it just hung. I didn't get a kernel panic error or anything just a blank line. Are there any logs that I should send along to the list or if perhaps anyone has any ideas on what might have gone wrong/how to fix it? Thanks, David - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
