Re: help

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 20 Oct 2004, Srinivasa S wrote:

> i've a raid 5 setup with 3 disks each of 1 GB. i'm using it for some
> experimentation purpose. resync is n progress and is not ending at
> all. its almost 15 hrs since the resync started and the "cat
> /proc/mdstat" always shows something like this.
>
> Personalities : [raid5]
> md0 : active raid5 sdj1[2] sdi1[1] sdh1[0]
>       2002688 blocks level 5, 8k chunk, algorithm 2 [3/3] [UUU]
>       [>....................]  resync =  0.0% (0/1001344)
> finish=442287.5min speed=0K/sec

What kind of disks?  My bad Maxtor SATA drive caused similar issues.

----------------------------------------------------------------------
 Jon Lewis                   |  I route
 Senior Network Engineer     |  therefore you are
 Atlantic Net                |
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux