hear hear (also, here here) b-
John Stoffel wrote:
Hi Neil,
I've been using mdadm recently to work with some arrays and I really have to say I dislike how the commands are laid out and used. First off, they're not consistent from one usage to another. Of course, I'm going to be jerk and not give good examples since my personal box at home is down and I'm at work. But the idea is that when you assemble a RAID device, it should look similiar to how you manage that raid device.
I'd also love it if there was an mdadm shell, so I could just type 'mdadm' and get back a shell prompt like: mdadm>
which I could then use to manage my arrays.
For example, I think all the commands should be of the format:
mdadm <comand> [options] <array> [devices...]
as much as possible. I'm basing my thoughts on both the Vertias VxVM command set, as well as the ClearCase 'cleartool' command shell. So ideally I could do either:
> mdadm assemble md0 /dev/hda1 /dev/hda2 ...
or
> mdadm madam> assemble md0 /dev/hda1 /dev/hda2 ...
depending on my mood. Currently, the mdadm commands use various
formats for their arguement layouts and it's a pain to figure out what
to use.
So before I get all worked up on this issue, and spend a bunch of time
mapping out how I think the commands should work, do people agree with
my observation?
Thanks, John - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
