Now I don't get the raid up anymore. Mentally I've already accepted that my data is lost, but the engineer in me wants to do the impossible.
any help is more than welcome.
So, Ive gathered some more info.
I did a mkraid with following raidtab (which is still the same as I originally used, besides the failed-disk line then) :
raiddev /dev/md0
raid-level 5
nr-raid-disks 3
nr-spare-disks 0
persistent-superblock 1
chunk-size 32
parity-algorithm left-symmetric device /dev/hdc1
raid-disk 0
device /dev/hde1
failed-disk 1
device /dev/hdg1
raid-disk 2Then /prc/mdstat says the raid is in 'inactive state'.
The syslog output is:
Jul 16 12:52:23 localhost kernel: md: autorun ...
Jul 16 12:52:23 localhost kernel: md: considering hde1 ...
Jul 16 12:52:23 localhost kernel: md: adding hde1 ...
Jul 16 12:52:23 localhost kernel: md: adding hdg1 ...
Jul 16 12:52:23 localhost kernel: md: adding hdc1 ...
Jul 16 12:52:23 localhost kernel: md: created md0
Jul 16 12:52:23 localhost kernel: md: bind<hdc1>
Jul 16 12:52:23 localhost kernel: md: bind<hdg1>
Jul 16 12:52:23 localhost kernel: md: bind<hde1>
Jul 16 12:52:23 localhost kernel: md: running: <hde1><hdg1><hdc1>
Jul 16 12:52:23 localhost kernel: md: kicking non-fresh hde1 from array!
Jul 16 12:52:23 localhost kernel: md: unbind<hde1>
Jul 16 12:52:23 localhost kernel: md: export_rdev(hde1)
Jul 16 12:52:23 localhost kernel: raid5: device hdg1 operational as raid disk 2
Jul 16 12:52:23 localhost kernel: RAID5 conf printout:
Jul 16 12:52:23 localhost kernel: --- rd:3 wd:1 fd:2
Jul 16 12:52:23 localhost kernel: disk 2, o:1, dev:hdg1
Jul 16 12:52:23 localhost kernel: md :do_md_run() returned -22
Jul 16 12:52:23 localhost kernel: md: md0 stopped.
Jul 16 12:52:23 localhost kernel: md: unbind<hdg1>
Jul 16 12:52:23 localhost kernel: md: export_rdev(hdg1)
Jul 16 12:52:23 localhost kernel: md: unbind<hdc1>
Jul 16 12:52:23 localhost kernel: md: export_rdev(hdc1)
Jul 16 12:52:23 localhost kernel: md: ... autorun DONE.
The output of lsraid contracticts this. Is there any way in putting hdc1 back as disk 1 instead of spare (even manually by changing bits on the disk??) It still says I have two working disks.
viking:/mnt/new# lsraid -D -p -l
[dev 22, 1] /dev/hdc1:
md version = 0.90.0
superblock uuid = 829542B9.3737417C.D102FD21.18FFE273
md minor number = 0
created = 1087242684 (Mon Jun 14 21:51:24 2004)
last updated = 1089375813 (Fri Jul 9 14:23:33 2004)
raid level = 5
chunk size = 32 KB
apparent disk size = 195358336 KB
disks in array = 3
required disks = 3
active disks = 1
working disks = 2
failed disks = 2
spare disks = 1
position in disk list = 4
position in md device = -1
state = spare[dev 33, 1] /dev/hde1:
md version = 0.90.0
superblock uuid = 829542B9.3737417C.D102FD21.18FFE273
md minor number = 0
created = 1087242684 (Mon Jun 14 21:51:24 2004)
last updated = 1089149455 (Tue Jul 6 23:30:55 2004)
raid level = 5
chunk size = 32 KB
apparent disk size = 195358336 KB
disks in array = 3
required disks = 3
active disks = 2
working disks = 3
failed disks = 0
spare disks = 1
position in disk list = 3
position in md device = -1
state = failed[dev 34, 1] /dev/hdg1:
md version = 0.90.0
superblock uuid = 829542B9.3737417C.D102FD21.18FFE273
md minor number = 0
created = 1087242684 (Mon Jun 14 21:51:24 2004)
last updated = 1089375813 (Fri Jul 9 14:23:33 2004)
raid level = 5
chunk size = 32 KB
apparent disk size = 195358336 KB
disks in array = 3
required disks = 3
active disks = 1
working disks = 2
failed disks = 2
spare disks = 1
position in disk list = 2
position in md device = 2
state = goodMatthew (RAID) wrote:
Hmm. I posted the following (from my subbed addr) but it never appeared - in my inbox or on MARC. Perhaps I hit a keyword; reposting with some tweaks.
On Fri, 09 Jul 2004 16:18:07 -0700, "Matthew (RAID)" <RAID@xxxxxxxxxxxxxxx> said:
One more thing - run hdparm to check that the DMA settings are consistent - the same on all drives. Switch to the most conservative settings (the slowest ones). If they're not the same on all drives, I've heard (on /.) that it can cause some of the problems you're seeing.
My original reply below - it just went to Bernhard; I didn't check the addressing.
Let us know how things go.
PS Any ideas on my post?
On Fri, 09 Jul 2004 22:16:56 +0200, "Bernhard Dobbels" <Bernhard@xxxxxxxxxxx> said:
<snip>
viking:/home/bernhard# cat /etc/raidtab raiddev /dev/md0 raid-level 5 nr-raid-disks 3 nr-spare-disks 0 persistent-superblock 1 parity-algorithm left-symmetric
device /dev/hdc1 raid-disk 0 device /dev/hde1 failed-disk 1 device /dev/hdg1 raid-disk 2
Hmm. So the array is c+e+g, which think they are spare, failed, and good, respectively. The array won't be accessible unless at least two are good.
I wonder if running mkraid with --really-force when e was marked failed
was a good idea; hopefully it didn't make things worse.
viking:/home/bernhard# mkraid --really-force /dev/md0 DESTROYING the contents of /dev/md0 in 5 seconds, Ctrl-C if unsure! handling MD device /dev/md0 analyzing super-block disk 0: /dev/hdc1, 195358401kB, raid superblock at 195358336kB disk 1: /dev/hde1, failed disk 2: /dev/hdg1, 195358401kB, raid superblock at 195358336kB /dev/md0: Invalid argument
viking:/home/bernhard# raidstart /dev/md0 /dev/md0: Invalid argument
viking:/home/bernhard# cat /proc/mdstat
Personalities : [raid1] [raid5]
md0 : inactive hdg1[2] hdc1[0]
390716672 blocks
unused devices: <none>
viking:/home/bernhard# pvscan -v
Wiping cache of LVM-capable devices
Wiping internal cache
Walking through all physical volumes
Incorrect metadata area header checksum
Found duplicate PV uywoDlobnH0pbnr09dYuUWqB3A5kkh8M: using /dev/hdg1 not /dev/hdc1
Incorrect metadata area header checksum
Incorrect metadata area header checksum
Incorrect metadata area header checksum
Found duplicate PV uywoDlobnH0pbnr09dYuUWqB3A5kkh8M: using /dev/hdg1 not /dev/hdc1
PV /dev/hdc1 VG data_vg lvm2 [372,61 GB / 1,61 GB free]
PV /dev/hda1 lvm2 [4,01 GB]
Total: 2 [376,63 GB] / in use: 1 [372,61 GB] / in no VG: 1 [4,01 GB]
Yow.
I'm wondering if editing raidtab to make e (/dev/hde1) not failed and trying mkraid again is a good idea.
Any idea why c would think it was a spare? That's pretty strange.
Anyway, I'm no expert - I just posted a call for help:
http://marc.theaimsgroup.com/?l=linux-raid&m=108932298006669&w=2
that went unanswered. - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
