I have the same problem. David > Hej, > > I am using Suse 9.1 and have build (finally) my Raid-5 volume using the > raidtools. > > When I write large amounts of data to the array (i.e. 50 GB) in a cp or mv > operation, it always stops in the middle of the copy. It waits. There are > no > kernel messages, no errors, it just waits. > > The strange part is that after I do a "more /proc/mdstat" my cp/mv > operation > continues. > > Performance is descent with approx. 20-30MB/s writes and 80MB/s reads. > > You can see the rest of my setup in a previous post: > http://marc.theaimsgroup.com/?l=linux-raid&m=108738559332187&w=2 > > Has anybody seen this before? > > Alwin > > P.S. I am using two Maxtor 200GB IDE disks and two identical disks but > with > SATA interface. My box is a Dell 400SC and I run Suse 9.1 with the default > kernel. > > > - > To unsubscribe from this list: send the line "unsubscribe linux-raid" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
