Re: [PATCH v13 10/10] bluetooth: policy: Treat bi-directional A2DP profiles as suitable for VOIP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The 10 patches compile OK on PA master without warnings.

But doesn't work (device is Off with "Automatic Quality unavailable" status).

Tested on 2 devices.

hcidump avdtp
HCI sniffer - Bluetooth packet analyzer ver 5.51
device: hci0 snap_len: 1500 filter: 0x400
< AVDTP(s): Discover cmd: transaction 9 nsp 0x00
> AVDTP(s): Discover rsp: transaction 9 nsp 0x00
    ACP SEID 1 - Audio Sink
    ACP SEID 2 - Audio Sink
    ACP SEID 3 - Audio Sink
< AVDTP(s): Set config cmd: transaction 10 nsp 0x00
    ACP SEID 1 - INT SEID 2
    Media Transport
    Media Codec - SBC
      44.1kHz 
      DualChannel 
      16 Blocks
      8 Subbands
      Loudness 
      Bitpool Range 38-38
> AVDTP(s): Set config rsp: transaction 10 nsp 0x00
< AVDTP(s): Open cmd: transaction 11 nsp 0x00
    ACP SEID 1
> AVDTP(s): Open rsp: transaction 11 nsp 0x00


06.10.2019, 19:59, "Pali Rohár" <pali.rohar@xxxxxxxxx>:
> Previously module-bluetooth-policy was switching from A2DP to HSP profile
> when VOIP application started recording of source. Now it switch to profile
> with the highest priority which has both sink and source. In most cases it
> is HSP profile, but it can be also bi-directional A2DP profile (e.g.
> FastStream codec) as it has better audio quality.
> ---
>  src/modules/bluetooth/module-bluetooth-policy.c | 123 ++++++++++++------------
>  1 file changed, 62 insertions(+), 61 deletions(-)
>
> diff --git a/src/modules/bluetooth/module-bluetooth-policy.c b/src/modules/bluetooth/module-bluetooth-policy.c
> index 04313aa84..9652a91fe 100644
> --- a/src/modules/bluetooth/module-bluetooth-policy.c
> +++ b/src/modules/bluetooth/module-bluetooth-policy.c
> @@ -59,7 +59,12 @@ struct userdata {
>      pa_hook_slot *card_init_profile_slot;
>      pa_hook_slot *card_unlink_slot;
>      pa_hook_slot *profile_available_changed_slot;
> - pa_hashmap *will_need_revert_card_map;
> + pa_hashmap *profile_switch_map;
> +};
> +
> +struct profile_switch {
> + const char *from_profile;
> + const char *to_profile;
>  };
>
>  /* When a source is created, loopback it to default sink */
> @@ -142,43 +147,57 @@ static pa_hook_result_t sink_put_hook_callback(pa_core *c, pa_sink *sink, void *
>      return PA_HOOK_OK;
>  }
>
> -static void card_set_profile(struct userdata *u, pa_card *card, bool revert_to_a2dp)
> -{
> +static void card_set_profile(struct userdata *u, pa_card *card, const char *revert_to_profile_name) {
> + pa_card_profile *iter_profile;
>      pa_card_profile *profile;
> + struct profile_switch *ps;
> + char *old_profile_name;
>      void *state;
>
> - /* Find available profile and activate it */
> - PA_HASHMAP_FOREACH(profile, card->profiles, state) {
> - if (profile->available == PA_AVAILABLE_NO)
> - continue;
> -
> - /* Check for correct profile based on revert_to_a2dp */
> - if (revert_to_a2dp) {
> - if (!pa_startswith(profile->name, "a2dp_sink"))
> + if (revert_to_profile_name) {
> + profile = pa_hashmap_get(card->profiles, revert_to_profile_name);
> + } else {
> + /* Find highest priority profile with both sink and source */
> + profile = NULL;
> + PA_HASHMAP_FOREACH(iter_profile, card->profiles, state) {
> + if (iter_profile->available == PA_AVAILABLE_NO)
>                  continue;
> - } else {
> - if (!pa_streq(profile->name, "headset_head_unit"))
> + if (iter_profile->n_sources == 0 || iter_profile->n_sinks == 0)
>                  continue;
> + if (!profile || profile->priority < iter_profile->priority)
> + profile = iter_profile;
>          }
> + }
>
> - pa_log_debug("Setting card '%s' to profile '%s'", card->name, profile->name);
> + if (!profile) {
> + pa_log_warn("Could not find any suitable profile for card '%s'", card->name);
> + return;
> + }
>
> - if (pa_card_set_profile(card, profile, false) != 0) {
> - pa_log_warn("Could not set profile '%s'", profile->name);
> - continue;
> - }
> + old_profile_name = card->active_profile->name;
> +
> + pa_log_debug("Setting card '%s' from profile '%s' to profile '%s'", card->name, old_profile_name, profile->name);
>
> - /* When we are not in revert_to_a2dp phase flag this card for will_need_revert */
> - if (!revert_to_a2dp)
> - pa_hashmap_put(u->will_need_revert_card_map, card, PA_INT_TO_PTR(1));
> + if (pa_card_set_profile(card, profile, false) != 0) {
> + pa_log_warn("Could not set profile '%s'", profile->name);
> + return;
> + }
>
> - break;
> + /* When not reverting, store data for future reverting */
> + if (!revert_to_profile_name) {
> + ps = pa_xnew0(struct profile_switch, 1);
> + ps->from_profile = old_profile_name;
> + ps->to_profile = profile->name;
> + pa_hashmap_put(u->profile_switch_map, card, ps);
>      }
>  }
>
>  /* Switch profile for one card */
> -static void switch_profile(pa_card *card, bool revert_to_a2dp, void *userdata) {
> +static void switch_profile(pa_card *card, bool revert, void *userdata) {
>      struct userdata *u = userdata;
> + struct profile_switch *ps;
> + const char *from_profile;
> + const char *to_profile;
>      const char *s;
>
>      /* Only consider bluetooth cards */
> @@ -186,29 +205,25 @@ static void switch_profile(pa_card *card, bool revert_to_a2dp, void *userdata) {
>      if (!s || !pa_streq(s, "bluetooth"))
>          return;
>
> - if (revert_to_a2dp) {
> - /* In revert_to_a2dp phase only consider cards with will_need_revert flag and remove it */
> - if (!pa_hashmap_remove(u->will_need_revert_card_map, card))
> + if (revert) {
> + /* In revert phase only consider cards which switched profile */
> + if (!(ps = pa_hashmap_remove(u->profile_switch_map, card)))
>              return;
>
> - /* Skip card if does not have active hsp profile */
> - if (!pa_streq(card->active_profile->name, "headset_head_unit"))
> - return;
> + from_profile = ps->from_profile;
> + to_profile = ps->to_profile;
> + pa_xfree(ps);
>
> - /* Skip card if already has active a2dp profile */
> - if (pa_startswith(card->active_profile->name, "a2dp_sink"))
> + /* Skip card if does not have active profile to which was switched */
> + if (!pa_streq(card->active_profile->name, to_profile))
>              return;
>      } else {
> - /* Skip card if does not have active a2dp profile */
> - if (!pa_startswith(card->active_profile->name, "a2dp_sink"))
> - return;
> -
> - /* Skip card if already has active hsp profile */
> - if (pa_streq(card->active_profile->name, "headset_head_unit"))
> + /* Skip card if already has both sink and source */
> + if (card->active_profile->n_sources > 0 && card->active_profile->n_sinks > 0)
>              return;
>      }
>
> - card_set_profile(u, card, revert_to_a2dp);
> + card_set_profile(u, card, revert ? from_profile : NULL);
>  }
>
>  /* Return true if we should ignore this source output */
> @@ -254,15 +269,15 @@ static unsigned source_output_count(pa_core *c, void *userdata) {
>  }
>
>  /* Switch profile for all cards */
> -static void switch_profile_all(pa_idxset *cards, bool revert_to_a2dp, void *userdata) {
> +static void switch_profile_all(pa_idxset *cards, bool revert, void *userdata) {
>      pa_card *card;
>      uint32_t idx;
>
>      PA_IDXSET_FOREACH(card, cards, idx)
> - switch_profile(card, revert_to_a2dp, userdata);
> + switch_profile(card, revert, userdata);
>  }
>
> -/* When a source output is created, switch profile a2dp to profile hsp */
> +/* When a source output is created, switch profile to some which has both sink and source */
>  static pa_hook_result_t source_output_put_hook_callback(pa_core *c, pa_source_output *source_output, void *userdata) {
>      pa_assert(c);
>      pa_assert(source_output);
> @@ -274,7 +289,7 @@ static pa_hook_result_t source_output_put_hook_callback(pa_core *c, pa_source_ou
>      return PA_HOOK_OK;
>  }
>
> -/* When all source outputs are unlinked, switch profile hsp back back to profile a2dp */
> +/* When all source outputs are unlinked, switch to previous profile */
>  static pa_hook_result_t source_output_unlink_hook_callback(pa_core *c, pa_source_output *source_output, void *userdata) {
>      pa_assert(c);
>      pa_assert(source_output);
> @@ -291,30 +306,16 @@ static pa_hook_result_t source_output_unlink_hook_callback(pa_core *c, pa_source
>  }
>
>  static pa_hook_result_t card_init_profile_hook_callback(pa_core *c, pa_card *card, void *userdata) {
> - struct userdata *u = userdata;
> - const char *s;
> -
>      pa_assert(c);
>      pa_assert(card);
>
> + /* If there are not some source outputs do nothing */
>      if (source_output_count(c, userdata) == 0)
>          return PA_HOOK_OK;
>
> - /* Only consider bluetooth cards */
> - s = pa_proplist_gets(card->proplist, PA_PROP_DEVICE_BUS);
> - if (!s || !pa_streq(s, "bluetooth"))
> - return PA_HOOK_OK;
> -
> - /* Ignore card if has already set other initial profile than a2dp */
> - if (card->active_profile &&
> - !pa_startswith(card->active_profile->name, "a2dp_sink"))
> - return PA_HOOK_OK;
> -
> - /* Set initial profile to hsp */
> - card_set_profile(u, card, false);
> + /* Set initial profile to some with source */
> + switch_profile(card, false, userdata);
>
> - /* Flag this card for will_need_revert */
> - pa_hashmap_put(u->will_need_revert_card_map, card, PA_INT_TO_PTR(1));
>      return PA_HOOK_OK;
>  }
>
> @@ -447,7 +448,7 @@ int pa__init(pa_module *m) {
>          goto fail;
>      }
>
> - u->will_need_revert_card_map = pa_hashmap_new(pa_idxset_trivial_hash_func, pa_idxset_trivial_compare_func);
> + u->profile_switch_map = pa_hashmap_new(pa_idxset_trivial_hash_func, pa_idxset_trivial_compare_func);
>
>      u->source_put_slot = pa_hook_connect(&m->core->hooks[PA_CORE_HOOK_SOURCE_PUT], PA_HOOK_NORMAL,
>                                           (pa_hook_cb_t) source_put_hook_callback, u);
> @@ -512,7 +513,7 @@ void pa__done(pa_module *m) {
>      if (u->profile_available_changed_slot)
>          pa_hook_slot_free(u->profile_available_changed_slot);
>
> - pa_hashmap_free(u->will_need_revert_card_map);
> + pa_hashmap_free(u->profile_switch_map);
>
>      pa_xfree(u);
>  }
> --
> 2.11.0
>
> _______________________________________________
> pulseaudio-discuss mailing list
> pulseaudio-discuss@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
_______________________________________________
pulseaudio-discuss mailing list
pulseaudio-discuss@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss




[Index of Archives]     [Linux Audio Users]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux