[PATCH 2/3] bluetooth: Change A2DP codec API of reset() method to indicate failure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



SBC codec reset() method may fail, so propagate this failure to caller.
---
 src/modules/bluetooth/a2dp-codec-api.h       |  4 ++--
 src/modules/bluetooth/a2dp-codec-sbc.c       |  5 +++--
 src/modules/bluetooth/module-bluez5-device.c | 18 ++++++++++++------
 3 files changed, 17 insertions(+), 10 deletions(-)

diff --git a/src/modules/bluetooth/a2dp-codec-api.h b/src/modules/bluetooth/a2dp-codec-api.h
index 881cc659b..bc4844596 100644
--- a/src/modules/bluetooth/a2dp-codec-api.h
+++ b/src/modules/bluetooth/a2dp-codec-api.h
@@ -69,8 +69,8 @@ typedef struct pa_a2dp_codec {
     void *(*init)(bool for_encoding, bool for_backchannel, const uint8_t *config_buffer, uint8_t config_size, pa_sample_spec *sample_spec);
     /* Deinitialize and release codec info data in codec_info */
     void (*deinit)(void *codec_info);
-    /* Reset internal state of codec info data in codec_info */
-    void (*reset)(void *codec_info);
+    /* Reset internal state of codec info data in codec_info, returns non-zero on failure */
+    int (*reset)(void *codec_info);
 
     /* Get read block size for codec, it is minimal size of buffer
      * needed to decode read_link_mtu bytes of encoded data */
diff --git a/src/modules/bluetooth/a2dp-codec-sbc.c b/src/modules/bluetooth/a2dp-codec-sbc.c
index e2db91b63..f57c7b01a 100644
--- a/src/modules/bluetooth/a2dp-codec-sbc.c
+++ b/src/modules/bluetooth/a2dp-codec-sbc.c
@@ -466,20 +466,21 @@ static void set_bitpool(struct sbc_info *sbc_info, uint8_t bitpool) {
     pa_log_debug("Bitpool has changed to %u", sbc_info->sbc.bitpool);
 }
 
-static void reset(void *codec_info) {
+static int reset(void *codec_info) {
     struct sbc_info *sbc_info = (struct sbc_info *) codec_info;
     int ret;
 
     ret = sbc_reinit(&sbc_info->sbc, 0);
     if (ret != 0) {
         pa_log_error("SBC reinitialization failed: %d", ret);
-        return;
+        return -1;
     }
 
     /* sbc_reinit() sets also default parameters, so reset them back */
     set_params(sbc_info);
 
     sbc_info->seq_num = 0;
+    return 0;
 }
 
 static size_t get_block_size(void *codec_info, size_t link_mtu) {
diff --git a/src/modules/bluetooth/module-bluez5-device.c b/src/modules/bluetooth/module-bluez5-device.c
index fb6c523ab..548a8d131 100644
--- a/src/modules/bluetooth/module-bluez5-device.c
+++ b/src/modules/bluetooth/module-bluez5-device.c
@@ -766,7 +766,7 @@ static void transport_config_mtu(struct userdata *u) {
 }
 
 /* Run from I/O thread */
-static void setup_stream(struct userdata *u) {
+static int setup_stream(struct userdata *u) {
     struct pollfd *pollfd;
     int one;
 
@@ -774,16 +774,18 @@ static void setup_stream(struct userdata *u) {
 
     /* return if stream is already set up */
     if (u->stream_setup_done)
-        return;
+        return 0;
 
     pa_log_info("Transport %s resuming", u->transport->path);
 
     if (u->profile == PA_BLUETOOTH_PROFILE_A2DP_SINK) {
         pa_assert(u->a2dp_codec);
-        u->a2dp_codec->reset(u->encoder_info);
+        if (u->a2dp_codec->reset(u->encoder_info) != 0)
+            return -1;
     } else if (u->profile == PA_BLUETOOTH_PROFILE_A2DP_SOURCE) {
         pa_assert(u->a2dp_codec);
-        u->a2dp_codec->reset(u->decoder_info);
+        if (u->a2dp_codec->reset(u->decoder_info) != 0)
+            return -1;
     }
 
     transport_config_mtu(u);
@@ -808,6 +810,8 @@ static void setup_stream(struct userdata *u) {
 
     if (u->source)
         u->read_smoother = pa_smoother_new(PA_USEC_PER_SEC, 2*PA_USEC_PER_SEC, true, true, 10, pa_rtclock_now(), true);
+
+    return 0;
 }
 
 /* Called from I/O thread, returns true if the transport was acquired or
@@ -819,8 +823,10 @@ static bool setup_transport_and_stream(struct userdata *u) {
     if (transport_error < 0) {
         if (transport_error != -EAGAIN)
             return false;
-    } else
-        setup_stream(u);
+    } else {
+        if (setup_stream(u) < 0)
+            return false;
+    }
     return true;
 }
 
-- 
2.11.0

_______________________________________________
pulseaudio-discuss mailing list
pulseaudio-discuss@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss




[Index of Archives]     [Linux Audio Users]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux