On 07/07/2019 21:47, tony.chabot@xxxxxxxxxxxx wrote:
I have searched
Setup: Desktop machine (Centos 7, PulseAudio 10.0), and a Raspberry Pi
2B (Raspbian (Debian) Buster PulseAudio 12.2) with DAC and speaker.
If I play a video point-to-point over TCP the synch is fine, but over
RTP (with latency_msec=1 on RPi) there is signifcant audio latency -
enough to be irritating.
If I add a second, identical RPi (although with Raspbian Stretch and
PulseAudio 12.2), the RTP sound is synchronous on each machine (but
not with the video).
This is on a small private wired LAN (Netgear GS724T V3), 1G to
desktop, 100M to RPI.
I have set tsched=0 in order to eradicate pops and sprogs.
What can I do to reduce RTP latency?
I eventually want to connect a guitar, and would need realtime
loop-through, so no suggestions about increasing audio latency to
obtain lip-synch, please.
Tony
_______________________________________________
pulseaudio-discuss mailing list
pulseaudio-discuss@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
"I eventually want to connect a guitar" - I was doing some estimates,
and if I were you, I would bypass not only pulseuadio, but also ALSA
I.e. I would create a dedicated audio program that bypasses the kernel
and interacts with device directly. I would also starve the OS WRT
scheduling. I.e. I would allocate, say, 99% of time to the dedicated
program. I would also tune kernel ticks to be in sync with sample rate.
--Sergei.
_______________________________________________
pulseaudio-discuss mailing list
pulseaudio-discuss@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
